Curriculum vitae

 

Personal Data

 

Name: Professor Dr. Ir. Wan Khairuddin bin Wan Ali.

IC Number: 640813-11-5047

Employer No.: 5143

Date and Place of Birth: 13 August 1964 / Kuala Terengganu

 

Name of Current Employer: NAIB CANSELOR, U.T.M.

FAKULTI KEJURUTERAAN MEKANIKAL

UNIVERSITI TEKNOLOGI MALAYSIA

KAMPUS SKUDAI

81310 UTM-SKUDAI JOHOR BARU, JOHOR

Tel.: 07 – 553 4719.

Fax: 07-5566 159 E-mail address: wankhai@fkm.utm.my

 

Academic Qualification

 

Doctor of Philosophy:              Microwave: Antennas and Propagation (Wideband Microstrip Antenna), 1998

Cranfield University, England

 

Master of Science:                    Electronics System Design having specialised in Avionics, 1992

Dept of Electronics System Design

College of Aeronautics

Cranfield Institute of Technology, England

 

Bachelor of Eng. (Hons.):        Mechanical and Electrical Engineering, 1986

Tasmania University, Australia

 

Working  Experiences:

 

February 2014 – Present                                                                                     Fakulti Kejuruteraan Mekanikal

Head of Aeronautical Laboratory                                                                           Universiti Teknologi Malaysia

  • Managing Aeronautical Laboratory, consultancy and research.

July 1987 – Present                                                                                              Fakulti Kejuruteraan Mekanikal

Assistant Lecturer, Lecturer, Associates Professor, Professor                              Universiti Teknologi Malaysia

  • Conducted research in the areas of Electromagnetic Theory and Techniques, Antenna and Propagation, Solid fuel rockets and Instrumentation
  • Teaching; Aircraft Instrumentation, Avionics, Electronics, Statics, Fluid Mechanics and Thermodynamics, Professional practice, Experimental Method and Research Methodology.
  • Consultant to several projects including; Instrumentation and Calibration works with Mitti Cable Sdn. Bhd., Instrumentation works with Highway & Transportation Research Group, Fakulti Kejuruteraan Awam, UTM., Vibration Study with Proton, and Instrumentation works with Syarikat Malaysian Explosive.
  • Received a total of more than RM 3,000,000.00 in grants, contracts and fundings from government and private sectors for short and long term research funding since 1992.
  • Received a total of more than RM 85,000.00 in grant from Malaysian Venture Capital Berhad and Universiti Teknologi Malaysia for commercialisation of research products.
  • Leader for several research projects including; Application of microstrip circuit in avionics, The study on the mechanical properties of ceramic material, Design of small rocket motor, Solid fuel rocket, Wideband microstrip antenna for land based vehicle, Wideband microstrip antenna for cars and commercial vehicles, Developing odd shape microstrip lines, First year development of stable solid propellant and Rocket Technology Development Program Between Agensi Angkasa Negara and University Technology Malaysia.
  • Active member of several research projects; Designing and building data acquisition, control and instrumentation system for UTM Low speed wind tunnel, Development of microwave dehydration dryer for sludge waste treatment, Development of Microwave absorption material from local agriculture waste charcoal and Development of linearly polarize radial line slot array antenna.
  • Appointed head of combustion laboratory in 1988, responsible for the up grading of the laboratory facilities, long term infrastructure and manpower planning, buying new equipments, designing data acquisition facilities and planning for the moving of the laboratory from UTM K.L. campus to UTM J.B campus.
  • Appointed Head of Aerospace and Transport Technologies, Research Management Center, UTM, April 2007 – Mei 2009.
  • Appointed Head of Aeronautics Department, Faculty of Mechanical Engineering, UTM, 2010 – 2012
  • Key person and responsible for the writing-up of the technical specifications for several centre of excellent laboratories such as
  • UTM Low speed wind tunnel (Instrumentation), total project cost » RM 30M
  • UTM Marine towing tank (Instrumentation), total project cost » RM 29M
  • WCC Microwave anechoic chamber (The whole Chamber and equipments), total project cost » RM 4.5M
  • Setting –up and up grading electronic facility at ADC, total project cost » RM 2M
  • Propulsion Laboratory, Faculty of Mechanical Engineering, UTM. Total cost ≈ RM 0.2M
  • Has written several course syllabi for Faculty of Mechanical Engineering such as
  • Electronic and Instrumentation syllabus for M. Sc. program
  • Research Methodology syllabus for M.Sc. program
  • Instrumentation Syllabus for Undergraduate program
  • Instrumentation and Avionics Syllabus for Undergraduate program

 

May 1987 – June 1987                                                                                                        Geliga Slipway Sdn Bhd

Engineer, Manager                                                                                                             Kemaman Terengganu

  • Responsible for all boat refitting activities, manpower planning, design and implementation of management, quality and safety systems.
  • Evaluate client’s requirements; prepare technical proposal and alternative design including cost analysis for tender.
  • Foreseeing the designing and fabrication of mechanical parts

 

Oct. 1986 – April 1987                                                                                                          Faculty of Engineering

Research Engineer                                                                                               University of Tasmania Australia

  • Responsible for three major consultant projects; Experimental work on the drying of Pyrethrum flowers, Designing a high speed data acquisition facilities for a project in association with Telecom Australia and Designing another data acquisition system for sampling data from an experiment to measure the dynamic properties of timber. All projects were successfully completed

 

Oct 1985 –Dec 1985                                                                                   Tasmanian HydroElectric Commission

Trainee Engineer                                                                                       Hobart, Tasmania

  • Responsible for designing and fabricating mechanical components and safety equipments for assisting the construction of hydroelectric dam at Tulah, Tasmania

 

Positions Held:

 

  1. Head of Aeronautical Laboratory (since 2014)

 

  1. Professor (VK 7) (since 2007)

Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia

 

  1. Head of Aeronautics Department, (2010 – 2012)

Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia

 

  1. Head of Aerospace and Transport Technology Cluster (2007 – 2009)

Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia

 

  1. Associates Professor (DS54 P1T10) (2000)

Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia

 

  1. Tender Technical Specification Committee (since 1992)

Chairman (since 2008)

Member (since 1992)

Universiti Teknologi Malaysia

 

  1. Panel Member of Curriculum Assessor (since 1999)

Malaysian Qualifications Agency (Previously National Accreditation Board)

Responsible for assessing, evaluating and recommending approval for curriculum from more than 35 private institutes of higher learning such as (selected few);

    1. M.Sc. in Energy and Environment, Malaysia University of Science and Technology
    2. M.Sc. in System Engineering and Management, Malaysia University of Science and Technology
    3. Diploma and Degree programs for Aircraft Maintenance Technology, MIAT, UniKL.
    4. B. Eng. (Mechanical), Curtin University of Technology, Sarawak.
    5. B. Tech. In Mechatronics, Swinburne Sarawak institute of Technology.
    6. Diploma in Industrial Automation (Mechatronics) Terengganu Advance Technical Institute.
    7. Diploma in Mechanical Engineering, Universiti Tenaga Nasional
    8. Diploma in Mechatronics Engineering, Box Hill Institute of Tafe Melbourne, Australia.
    9. Higher National Diploma in Mechanical Engineering, International University College of Technology, Twintech.
    10. Higher National Diploma in Mechatronic Engineering, Megatech Institute.
    11. Foundation Certificate in Engineering Science Technology, KBU International College
    12. Alpha Engineering, Multimedia University

 

  1. Committee Member of Standard Working Group (since 1999 – 2003)

Industrial Standard Committee, Sirim Bhd.

 

  1. Chairman, (1999 – 2003)

Working Group on Draft Malaysian Standard 00L007R0

‘Specification for Speed Monitoring Device for Road Vehicles’

Industrial Standard Committee, Sirim Berhad

 

  1. Chairman, (1999 – 2003)

Working Group on Draft Malaysian Standard

‘Maximum Road Speed Limiter for Land Based Motor Vehicles

Part 1: Specification for Performance, Installation and Marking Requirements’

Industrial Standard Committee, Sirim Berhad

 

  1. Chairman of VIVA-VOCE of Master and PhD examination (2009 – Present)

 

  1. Chairman for Undergraduate Project ( 2010 – 2012)

 

  1. Research Grants Evaluation Specialist (2010 – Present)

R,D & C Fund,  Ministry of Science, Technology and Innovation.

FRGS, PRGS and TRGS, Ministry of Education

 

  1. Member for panel of assessors for LAN/MQA (1998 – Present)

Assessing and evaluating the curriculum of private higher learning institutions.

 

 

Professional Courses Completed

 

  1. Fundamental of microwave Engineering, Cranfield University, 20th – 24th May 1996
  2. RF/MW Amplifier Design, Besser Associates, October 26, 1992
  3. Instrumentation and control for energy auditing and conservation in building, Organized by ISI,

UTM, December 7th – 9th, 1993

  1. Engine Performance Test, Pusat Latihan Pengajar & Kemahiran Lanjutan, June 12th – 30th, 1989

 

Professional Affiliation and Membership

 

  1. A registered professional engineer with The Board of Engineers, Malaysia
  2. A member of The Institution of Engineers, Malaysia
  3. A member of The Institute of Electrical and Electronics Engineers, Inc., USA
  4. A member of The Association of Professional Engineers of Australia
  5. A member of AIAA, USA

 

Teaching and Academic Experience

 

Having more than 22 years of lecturing experiences in various engineering topics such as:

 

Diploma level: 1) Thermodynamic (final year), 2) Thermodynamic (second year), 3) Fluid dynamic (second year), 4) Instrumentation and Avionics (final year), 5) Navigation aids (ATC first year) and 6) Electronics (final year).

 

Degree level: 1) Instrumentation and Avionics (Final Year), 2) Electronics (Third year) and 3) Instrumentation (Fourth year), 4) Static (First year), 5) Experimental Method (First year) 6) Thermodynamics (Third year) 7) Fluid Mechanic/Dynamic (Second year), Professional Practice (Final Year), Experimental Method (First Year), Avionics (Third Year), Aircraft Instrumentation (Third Year)

 

Post Graduate level:  1) Research Methodology, 2) Instrumentation and Sampling

 

Syllabus Development

Had designed and written the syllabi for the following subjects taught in UTM;

  • Instrumentation and avionics for Bachelor of Mechanical Engineering (Aeronautics)
  • Instrumentation for Bachelor of Mechanical Engineering

3)      Instrumentation for Master of Science Degree in Mechanical Engineering

4)      Measurements for Master of Science Degree in Mechanical Engineering

5)      Research Methodology for Master of Science Degree in Mechanical Engineering

 

Successfully supervised more than 14 completed MSc students, 5 completed PhD students, and 80 completed Undergraduate project (UGP) students.

 

Research Experience

 

Number of Years of Experience in Research: More than 20 years (since 1988)

Fields of Specialisation are 1) Avionics. 2) Microwave circuits, 3) Antennas and Propagation, 4) Instrumentation and Measurement, 5) Solid propellant and 6) Rocket motor design.

Current area of research project: 1) Development of wideband antennas, 2) Development of Avionics laboratory and 3) Development of solid propellant rockets and related technologies.

 

Major research projects completed

 

  1. High Speed Vision System, From: Dec. 1985 to Dec. 1986, Position held: Research student.
  1. Design of a Microwave Down Converter, From: Oct. 1989 to Oct. 1991, Position held: Sc. student.
  1. Design of Wideband Microstrip Antenna, From: Dec. 1995 to Oct. 1998, Position held: Ph.D. student
  1. Avionics: The study of microstrip properties and applications, From: March 1992, Position held: Research leader.
  2. The R&D in Instrumentation Facility for the FKJ Wind Tunnel, From: Jan. 1994 to Jan. 1995, Position held: Project leader.
  1. Solid Propulsion and Rocket Motor Development, From: Jan. 1991 to Nov. 1995, Position held: Project leader.
  2. To determine the mechanical properties of refractory ceramic and its applications, From: Jan. 1992 to Jan. 1993, Position held: Project leader.
  1. Wideband Microstrip Antennas for Cars and Commercial Vehicles Modern Communication System, From: Sept. 2000 until present, Position held: Project Leader.
  2. Radial Line Slot Array Antenna Design and Development, From: Jan 1999 to Dec 2000, Position held:
  3. Flat Antenna Design for Indoor Application For 3G Mobile Communication, From: Jun 2001 until 2004, Position held: Researcher
  4. Development of Microwave Dehydration Dryer for Sludge Waste Treatment, From: August 2000 until 2003, Position held: Researcher
  5. Development of a Small Sounding Rocket, From: Sept. 2000 to 2002, Position held:
  6. First Year Development of Stable Solid Propellant and Rocket Motor, From Feb. 2007 to 2009, Position held: Project leader
  7. Development of odd shape microstrip structures, From sep 2007 to 2009, Position held: Project Leader
  8. Development of 150N rocket, From June 2009-2010, Position held: Project Leader
  9. Agensi ANGKASA Negara and UTM, Rocket technology development program, From 2009 until 2013 Position held: Program Leader.
  10. Development of System for the Removal of Tiles and Other Architectural Finishes at a Minimal Noise and Dust Level, From March 2014 until 2015, International Contract Research, Position held: Project Leader.

 

  1. Consultancy work experiences

 

  1. Advisor and consultant for Aerospace Industries Malaysia (AIM), for Aviation and Weapon Matters, Mobile Surface to Surface Missile Project, (13/4/2003 – 23/4/2003) Project Value (Approx): RM 360M
  2. Consultant for Defense Ministry on Rocket Development Project, 28/7/2003 – 31 Dec. 2007, Project Value (Approx): RM 240M.
  3. Consultant for OFS, Medical & Aerospace Laboratory Sdn. Bhd. on Research and Fabrication of Ground to Air Medium Range Guided Missile (Naga Sakti XXI), 24/7/2003 – 2005, Project Value (Approx): RM 50M
  4. Consultant for First Class Equity Sdn. Bhd. On Weapon Area, January 2005 – 2007, Project Value (Approx): RM 200M

 

 

Honours and Awards

 

  1. The Shell Engineering Prize, Australia, 1985
  2. GEC Avionics Prize, England, 1992
  3. Kertas Kerja Terbaik, Seminar Penyelidikan IRPA \ UPP, FKM, Malaysia, 22hb Julai 1994
  4. Sijil Anugerah Khidmat Cemerlang, Hari Q, UTM, 1998
  5. Pingat perak, Inatex, UTM, 2003
  6. Sijil Anugerah Khidmat Cemerlang, Hari Q UTM, 2005
  7. Best Paper Award in Aeronautic, Conference on Aerospace Technology of the XXI Century, UPM, Malaysia 18 – 19 Nov 2009

 

Selected Major Publications

 

Undergraduate Thesis

  1. High Speed Vision System, W.K.Wan Ali, B.E.(Hons.) Thesis, Tasmania University, Australia 1986

 

Master of Science Thesis

  1. Design of Microwave Down Converter. W.K.Wan Ali, MSc. Thesis, Cranfield University, U.K. 1991

 

Ph. D Thesis

  1. Design of A Wideband Microstrip Antenna. W.K.Wan Ali, Ph.D. Thesis, Cranfield University, U.K. 1998

 

 

Electronics and Electromagnetic Engineering

 

Books and Reports

 

  1. Avionics For Aeronautical Engineers, A Teaching Module, Wan Khairuddin Wan Ali, July 2004, Faculty of Mechanical, UTM

 

  1. Aircraft Instrumentation For Aeronautical Engineers, A Teaching Module, Wan Khairuddin Wan Ali, , July 2004, Faculty of Mechanical, UTM

 

  1. Sensor, Chapter 4, Data Processing: A Theoretical Development to Simply The Analysis of Square Patch Microwave Sensor Built On Multi-Layer Substrate, Wan Khairuddin Wan Ali, 2003, IEEE (Malaysia Section)

 

  1. Development of Microstrip Line With Special Deformation, (VOTE 79222), Wan Khairuddin Wan Ali, Final Report, Dept. of Aeronautic, Faculty of Mechanical Engineering, UTM, July 2009.

 

  1. Wideband Microstrip Antenna For Land Based Vehicles, (VOTE 74038), Wan Khairuddin Wan Ali, Final Report, Dept. of Aeronautic, Faculty of Mechanical Engineering, UTM, October 2004

 

  1. Wideband Microstrip Antennas For Cars and Commercial Vehicles Modern Communication System, (VOTE 72399), Wan Khairuddin Wan Ali, Final Report, Dept. of Aeronautic, Faculty of Mechanical Engineering, UTM, April 2003

 

Journals and seminars papers

 

  1. Observation on Solid Propellant Ignition Using High Speed Camera: The Effect of Hot Wire Position on the Combustion Flame Contour, Wan Khairuddin Wan Ali, Ang Kiang Long, Mohammad Nazri Mohd. Jaafar, Jurnal Teknologi, Vol 71, No 2. Universiti Teknologi Malaysia, E-ISSN2180-7322, Malaysia 2014.
  2. Performance Study of Preliminary Mini Anechoic Chamber Fitted with Coconut Shell Coated Absorbers, Hasnain Abdullah , Juliana Md Sharif , Mohd Nasir Taib , Rusnani Ariffin , Nurul Iza Muhammad , Rohaiza Baharudin , Asmalia Zanal , Ida Rahayu Mohamed Noordin , Noorhayati Mohamad Noor , Azizah Ahmad, Siti Zura A Jalil ,Wan Khairuddin Wan Ali, 2013 IEEE International Conference on Control System, Computing and Engineering, 29 Nov. – 1 Dec. 2013, Penang, Malaysia
  3. The Development of Accelerometer Calibrator, Mohammad Fadli Sinnamitin, Wan Khairuddin Wan Ali, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia.
  4. Design of Portable Mini Anechoic Chamber Using Low Cost Composite Absorber, Hasnain Abdullah, Malisa Shaziea Sabilurrashad, Imran Mohd Ibrahim, Rusnani Ariffin, Siti Zura A. Jalil, Wan Khairuddin Wan Ali, Mohd Nasir Taib, Proceedings of 2009 Student Conference on Research and Development (SCOReD 2009) 16-18 Nov. 2009, UPM Serdang, Malaysia
  5. Development of an Indigenous Microwave Absorber, Hasnain Abdullah, Muhamad Hafiz Brahim, Imran Mohd Ibrahim, Rusnani Ariffin, Wan Khairuddin Wan Ali, Mohd Nasir Taib, Journal of Telecommunication, Electronics and Computer Engineering, Vol. 1 No.1, July – December 2009, Universiti Teknikal Malaysia Melaka, Malaysia
  6. Numerical Investigation of The Effect Of A Rod Dielectric Lens On Electromagnetic Wave Strength Using Two Dimentional FDTD Method, Mohammad Noor Ezwan Abdullah, Wan Khairuddin Wan Ali, 2008 IEEE International RF and Microwave Conference, 2 – 4 December 2008, Kuala Lumpur Malaysia.
  7. Antenna Positioner Design Review, Wan Khairuddin Wan Ali, Lim Chun Khai, Jurnal Mekanikal, No. 22, August 2006, Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia.

 

  1. Development of Antenna Positioner, Wan Khairuddin Wan Ali, Lim Chun Khai, Jurnal Mekanikal, No. 21, June 2006, Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia,

 

  1. Effect of Palm Shell Carbon – Polyester Resin Composite on Microwave Absorber Properties, Farid Nasir Ani, Wan Khairuddin Wan Ali, Ahmad Anas Yusof, Jurnal Mekanikal, No. 19, June 2005, Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia.

 

  1. Microwave and Reflection Properties of Palm Shell Carbon – Polyester Conductive Composite Absorber, Ahmad Anas Yusof, Wan Khairuddin Wan Ali, Tharek Abd. Rahman, Farid Nasir Ani, Jurnal Teknologi, No. 42, Jun 2005, Penerbit UTM

 

  1. A Theoretical Development to Simply The Analysid of Square Patch Microwave Sensor Built On Multi-Layer Substrate, Wan Khairuddin Wan Ali, Asian Conference on Sensors, 2003, IEEE (Malaysia Section), Kuala Lumpur, Malaysia.

 

  1. Broadband Square Microstrip Patch Antenna with Suspended Parasitic Element,K.Wan Ali, 6th International Symposium on Antenna, Propagation and EM Theory Proceeding, IEEE Press, Oct. 28 – Nov. 1, 2003, Beijing, China.

 

  1. Microwave Spouted Bed Dryer for Sludge Waste, M. Rozainee, Khairuddin W. Ali, K.G. Tan and C. T. Wong, Conference in conjunction with The Public Institutions of Higher Learning (IPTA) R & D Exposition 2003, 9 – 10 Oct. 2003, Kuala Lumpur, Malaysia.

 

  1. Experimental performance of A C – Band Microstrip Antenna, Khairuddin Wan Ali, Conference in conjunction with The Public Institutions of Higher Learning (IPTA) R & D Exposition 2003, 9 – 10 Oct. 2003, Kuala Lumpur, Malaysia.

 

  1. Wideband Compact Microstrip Antenna, Khairuddin Wan Ali, The Public Institutions of Higher Learning (IPTA) R & D Exposition 2003, 9 – 10 Oct. 2003, Kuala Lumpur, Malaysia.

 

  1. A Theoretical Development to Simplify The Analysis of Square Patch Microwave Sensor Built On Multi-layer Substrate, Wan Khairuddin Wan Ali, AsiaSense 2003 – Asian Conference On Sensor, IEEE (Malaysia Section), 14 – 18 July 2003, Kuala Lumpur.

 

  1. Small Aperture Radial Line Slot Array (RLSA) Anenna Design and Development for Indoor WLAN Application, T. Abdul Rahman, F. Ayu,K.Wan Ali, I. Kasim, Seminar ASITT 2003: Research Seminar RM K7 and RM K8, May 7, 2003, Johor.

 

  1. A New Simplified Approach to Analyze a Microstrip Patch Antenna Built on Multi-Layer Substrate, K.Wan Ali, Seminar ASITT 2003: Research Seminar RM K7 and RM K8, May 7, 2003, Johor.

 

  1. Microwave Drying of Sludge Waste in A Batch Spouted Bed Dryer, M. Rozainee, K.Wan Ali, K.G.Tan, A.C.Kumoro, S.K.Ng, The Proceeding of RSCE and 16th SOMChE, 28 – 30 Oct. 2002, Malaysia.

 

  1. Predicting the Equivalent Dielectric Constant for Simple Patch Resonator on Multilayer Substrate, K.Wan Ali, The proceeding of the 2nd World Engineering Congress, July 22 – 25, 2002, Sarawak.

 

  1. Comparison of Sludge Drying Performance Between Microwave and Convective Drying, Rozainee, M., Tan, K.G., Tan, C.H., Wan Ali, W.K. Kumoro, A.C., The 15th Symposium of Malaysian Chemical Engineers, Sept. 11 – 12th , 2001, Johor Bahru, Malaysia

 

  1. Simulation of Radial Line Slot Array (RLSA) for wireless LAN Antenna Design at 5.5 GHz., Tharek, A.R., Wan Ali, W.K., Ismail Kassim, F.A., Ibrahim, I., The Fourth International Symposium on Wireless Personal Multimedia Communications, Sept 9 –12. 2001, Aalborg, Denmark.

 

  1. Absorber Analysis for Anechoic Chamber, Ngah, R., Mohd Ibrahim, I., Wan Ali, W.K., National Conference On Telecomunication Technology 2000, 20 – 21st 2000, Johor Bahru, Malaysia.

 

  1. Development of Microwave Dehydration Dryer for Sludge Waste Treatment, M.Rozainee, K.G.Tan, K.Wan Ali, N.H.H. Khamis, Advance in Malaysian Energy Research (AMER 2000), Oct. 4th – 5th , 2000, Shah Alam.

 

  1. Invited Speaker: ‘Wideband Suspended Microstrip Antennas’, Wan Khairuddin Wan Ali, Technical Seminar, Astronautic Technology Sdn. Bhd. Kuala Lumpur, 23 rd June, 1999.

 

  1. Wideband Suspended Microstrip Antenna, K.Wan Ali and S.H.Al-Charchafchi, International Symposium on Antennas, JINA’98, Nice France, 17- l9th November 1998

 

  1. Using Equivalent Dielectric Constant to Simplify the Analysis of Patch Microstrip Antenna with Multi Layer Substrates, K.Wan Ali and S.H.Al-Charchafchi, IEEE AP-S International Symposium, Atlanta, Georgia, USA, 21 -26th June, 1998

 

  1. Design of a Dual Patch Triangular Microstrip Antenna, S.H.Al-Charchafchi, K.Wan Ali, M.R. Ibrahim and S.R. Barnes, Applied Microwave & Wireless, March 1998

 

  1. Experimental Performance of an L-Band Microstrip Antenna, S.H.Al-Charchafchi, K.Wan Ali and S.R.Barnes, Microwave Journal, January 1998

 

  1. A Stacked Annular-ring Microstrip Patch Antenna, S.H.A1-Charchafchi,K.Wan Ali and S. Sinkeree, IEEE AP-S Symposium, Montreal, Canada 1997

 

  1. The study of microstrip electromagnetic properties and method of measuring er , Wan Khairuddin Wan Ali Malaysian Science & Technology Congress ’94, Kuala Lumpur, 15 – 18 August, 1994.

 

  1. Realisation of Microwave Down Converter Using Microstrip Hybrid Coupler, K.Wan Ali, Jurnal Institusi Jurutera Malaysia, Bil. 51, 1992.

 

Mechanical Engineering

 

Books and Reports

  1. Combustion Characteristics of AP Based Solid Rocket Propellant, Propellant Selection, Fabrication & Testing, Amir Aziz, Wan Khairuddin Wan Ali,VDM Verlag Dr. Muller GmbH & Co. Germany, 2011.
  2. Pembangunan Roket Motor Bersaiz Kecil, M.N.M. Jaafar, K. Wan Ali, R.Mamat, Penerbit Universiti Teknologi Malaysia, 2009.

 

  1. Selected Topics In Aeronautical Engineering Research,Chapter 4 Burning Rate Studies on Solid Propellant, Mohammad Nazri Mohd Jaafar, Intan Noryanah Kimsin, Mohd Zaki Yamani Rahmat, Mohd Muzamil Wahab, Ainullotfi Abdul Latif, Wan Khairuddin Wan Ali, Zuriana Mariati Mat Yajid, Penerbit Universiti Teknologi Malaysia, 2008

 

  1. First Year Development of Solid Propellant (VOTE 77012), Wan Khairuddin Wan Ali, Final Report, Dept. of Aeronautic, Faculty of Mechanical Engineering, UTM, July 2009.

 

Journal and Conference papers

 

 

  1. Experimental Solid and Liquid Propellant Rocket Development in Universiti Teknologi Malaysia : 1992-2011, Wan Khairuddin Wan Ali, Kiang Long Ang, Mohammad Nazri Mohd. Jaafar, Jurnal Teknologi, Vol 73, No 1. Universiti Teknologi Malaysia, E-ISSN2180-7322, Malaysia 2015.

 

  1. Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant, Amir Aziz, Rizalman Mamat, Wan Khairuddin Wan Ali and Mohd Rozi Mohd Perang, ARPN Journal of Engineering and Applied Sciences, 10, No. 15, ISSN 1819-6608, AUGUST 2015.

 

  1. Simulation Study on the Effect of Asymmetric Fin Position on Aerodynamic Characteristic of a Missile, Wan Khairuddin Wan Ali, Mohamad Hafiz Shafie, Journal of Transport System Engineering,E-ISSN: 2289-9790, Vol 2, No 1 , 2015.

 

  1. Synthesis of Hydroxyl Terminated Epoxidized Natural Rubber as a Binder for Solid Rocket Propellant, N. E. S. binti Abdul Razak, H. bin Mohd Nor, K. bin Wan Ali, Applied Mechanics and Materials, Vol. 695, pp. 127-130, ISSN: 1662-7482, 2015.

 

  1. Development of Solid Rocket Propellant based on Isophorone Diisocyanate – Hydroxyl Terminated Natural Rubber Binder, Munirah Onn, Hussin Md Nor, Wan Khairuddin Wan Ali, Jurnal Teknologi, Vol 69, No 2. Universiti Teknologi Malaysia, E-ISSN2180-7322, Malaysia 2014.

 

  1. Hydroxyl Terminated Natural Rubber (HTNR) as a Binder in Solid Rocket Propellant, Norfhairna Baharulrazi, Hussin Mohd Nor and Wan Khairuddin Wan Ali, Advance Research in Material and Engineering Application, Applied Mechanics and Material, Vol 695, pp. 174-178, Nov. 2014

 

  1. Ammonium Perchlorate Based Solid Propellant Hot Wire Ignition Process: Observation Using High Speed Camera, Kiang Long Ang, Wan Khairuddin Wan Ali, The 2nd International Conference on Engineering and Applied Science (2013 ICEAS), Tokyo, 15 – 17 March, 2013.

 

  1. Development of strand burner for solid propellant burning rate studies, A Aziz, R Mamat1and W K Wan Ali, 2nd International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan, Malaysia1-3 July 2013.

 

  1. A Study of Burning Characteristics of AP/HTPB/AL Basic Components of a Composite Propellant, Amir Aziz and Wan Khairuddin Wan Ali , Journal of Aerospace Engineering & Technology, Volume 1, Issue 1, Feb. 2011, pg 21-26.

 

  1. A study of Basic Aluminized Propellant Characteristics, Amir Aziz and Wan Khairuddin Wan Ali, 2nd International Conference on Mechanical, Industrial and Manufacturing Technologies, Singapore 26 – 28 Feb. 2011.

 

  1. Effect of Oxidizer-Fuel Mixture Ratio to the Pressure Exponential of Ammonium Perchlorate Based Composte Propellant, Amir Aziz and Wan Khairuddin Wan Ali, The 2010 International Conference on Mechanical and aerospace Engineering (ICMAE 2010) , Nov. 26 – 28, 2010, Kuala Lumpur, Malaysia

 

  1. Combustion of High Energetic Materials, R. Mamat, M.Y. Taib, N.M.I.N. Ibrahim, K. Wan Ali, M.N. Mohd Jaafar, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia

 

  1. The Early Development of Solid Rocket Motor by ANGKASA-UTM, T. Farah Wahida, N. Hafizah, F. Azmin, K. Wan Ali, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia

 

  1. Atmospheric Pressure Burning Rate Studies on Potassium Based Solid Propellant, M.N. Mohd Jaafar , I.N. Kimsin, M.Z. Yamani Rahmat, M.M. Wahab, A. Abdul-Latif, K. Wan Ali, , Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia

 

  1. Potential Application of Telechelic Liquid Natural Rubber, Norfhairna Baharulrazi, Hussin Mohd Nor, Wan Khairuddin Wan Ali, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia.

 

  1. Effect of Oxidizer-Fuel Ratio and Chamber Pressure To The Burning Characteristic of AP/HTPB/AL Composite Propellant, Amir Aziz, Wan Khairuddin Wan Ali, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia.

 

  1. Review of Usage of Nitrocellulose in Propellant, Mohd Aliff Hafifi bin Abdullah, Wan Khairuddin Wan Ali, Conference on Engineering and Technology Education, Wold Engineering Congress 2010, 2nd – 5th August 2010, Kucing , Sarawak, Malaysia.

 

  1. H2O2/Kerosene, LOX/LCH4, and LOX/Kerosene Propellants for Application in Upper Stage Propulsion: A Comparative Study, S.Krishnan, Mohammad Nazri bin Mohd Jaafar, Wan Khairuddin Wan Ali, 7th International High Energy Material Conference & Exhibit (HEMCE 2009), Dec. 2009, Pune, India.

 

  1. Design, Modeling and Performance Prediction of Hydrogen Peroxide Monopropellant Thruster, S.Krishnan, Mohammad Nazri bin Mohd Jaafar, Wan Khairuddin Wan Ali, 7th International High Energy Material Conference & Exhibit (HEMCE 2009), Dec. 2009, Pune, India.

 

  1. Developing Indigenous Rocket Motor: A UTM Experiences,K. Wan Ali, M.N.M. Jaafar, A. Abdul Latif, M.N. Dahalan, A.B. Abd Rahman, Z.M. Mat Yajid, I.N. Kimsin, 2nd Regional Conference On Vehicle Engineering and Technology, July 2008, Kuala Lumpur.

 

  1. Development of a Burning Rate Test Rig for Solid Propellant,K. Wan Ali, M.N.M. Jaafar, I.N. Kimsin, 2nd Regional Conference On Vehicle Engineering and Technology, July 2008, Kuala Lumpur.

 

  1. Development of Solid Rocket Propulsion System at UTM, Mohammad Nazri Mohd. Jaafar, Wan Khairuddin Wan Ali, Nizam Dahalan, Rizalman Mamat, Jurnal Mekanikal, Bil 18, Dec. 2005, Faculty Of Mechanical Engineering, Universiti Teknologi Malaysia.

 

  1. Performance of Potassium Nitrate as Solid Propellant, M.N.Mohd Jaafar, K.Wan Ali, R. Mamat, 6th Asia – Pasific International Symposium on Combution and Energy Utilization, May 2002, Kuala Lumpur.

 

  1. Characteristic of Potassium Nitrate Based Solid Rocket Propellant, M.N.Mohd Jaafar,K.Wan Ali, R. Mamat, National Science Fellowship Scholarship Annual Workshop, Jan., 2002 Petaling Jaya.

 

  1. Pembakaran Propelan Roket Kimia Berasaskan Kalium Nitrat, M.N.Mohd Jaafar, K.Wan Ali, R. Mamat , Malaysian Science & Technology Congress 2001, Oct., 2001, Melaka.

 

  1. Pengaruh Kaedah Penyediaan/Fabrikasi Propelan Ke Atas Kadar Pembakaran, R. Mamat, M.N.Mohd Jaafar, K.Wan Ali, Advanced Material Development in Malaysia – 2000, May 15th – 16th May, 2001 Johor Bahru.

 

  1. The Chemical Composition and Compression Strength of Refractory Ceramics, Tested for 3 Curing Temperature, Wan Khairuddin Wan Ali, Jurnal Institusi Jurutera Malaysia, Bil-54, Jun 1994

 

  1. Building of A Light Aircraft at UTM, K.Wan Ali, S. Mansor, S. Muhammad, A. Abdullah and W.Z. Wan Omar, Jurutera, Bil 1994, No.6, June 1994

 

  1. Gayalaku pendakian, berlepas dan mendarat pesawat ringan Agro, Shuhaimi bin Mansor, Wan Khairuddin Wan Ali, Sallehuddin bin Mohammad, Buletin Jentera, July 1993

 

  1. ‘To Determine the Mechanical Properties of The Refractory Ceramic and Its Application’, Wan Khairuddin Wan Ali, Technical report Research and Consultancy Unit, UTM, Dec. 1992

 

  1. Agro Technical Report, Wan Khairuddin Wan Ali, Vol. 1 to 4, Perpustakaan Sultanah Zanariah, UTM, Dec 1992.

 

  1. Inter – Symbol – Interference (ISI): Development of demonstration unit, K.Wan Ali, Electronic System Design Seminar, Cranfield Institute of Technologi, UK, July 1992.

 

Malaysian Standards and Patent

 

  1. Maximum Road Speed Limiter for Land Based Motor Vehicles: Part 1: Specification for Performance, Installation and Marking Requirements, MS 1595: Part 1: 2003

 

  1. Maximum Road Speed Limiter for Land Based Motor Vehicles: Part 2: Specification for System and Component Requirements, MS 1595: Part 2: 2003

 

  1. Specification for Speed Monitoring Device for Road Vehicles, MS 1538 : 2002

 

  1. An Apparatus to Determine The characteristics of Solid Propellant, MY-134134-A

 

  1. Test Rig For Determining Burning Rate, MY-138050-A

 

  1. Improvements to An Antenna, MY-135583-A

 

An Omni-Directional Microstrip Antenna, PI 2009 12