1991-1995:
1. M.N. Tamin, D. Zheng and H. Ghonem, “Time Dependent Stress Analysis of Thermal Cyclic Loading in Titanium Metal Matrix Composites,” Proc. 7th NASA Thermomechanical Fatigue Workshop, NASA Lewis Research Center, Dec. 3-4, 1992.
2. M. Tamin, D. Zheng and H. Ghonem, “Axial Residual Stresses in Continuous Fiber Reinforced Metal Matrix Composites Under the Thermal Cyclic Loadings,” Proc. 7th Thermomechanical Fatigue Workshop, NASA Lewis Research Center, Dec. 3-4, 1992.
3. M Tamin, D. Zheng and H. Ghonem, “Micromechanical Modeling of Time Dependent Behavior in Fiber Reinforced Metal Matrix Composites,” Proc. FATIGUE 93, Montreal, Canada, 1993.
4. M.N. Tamin and H. Ghonem, “Inelastic Deformation of Continuous Fiber Reinforced Metal Matrix Composites Under Cyclic Thermal and Creep Loading,” Proc. Symp. On Damage Mechanics in Composites, ASME Winter Annual Meeting, Chicago, Nov. 13-18, 1994.
5. T. Zhang, M.N. Tamin and H. Ghonem, “Analysis of Time-Dependent Fatigue Crack Tip in Titanium Metal Matrix Composites,” ASME Winter Annual Meeting, Chicago, Nov. 12-17, 1995.
1996-2000:
6. M.N. Tamin, D. J. Osborne and H. Ghonem, “Processing-Related Interface Properties in Titanium Metal Matrix Composites,” Proc. First Int. Conf. On Ceramic and Metal Matrix Composites, CMMC 96, M. Fuentes, J.M. Martinez-Esnaola and A.M. Daniel, eds., Trans Tech Publications, Switzerland, 1996, pp. 639-650.
7. M.N. Tamin and H. Ghonem, “A Fatigue-Creep Interaction in Titanium Metal Matrix Composites,” Proc. 19th Int. Congress on Theoretical and Applied Mechanics, ICTAM 96, Kyoto, Japan, Aug. 25-31, 1996.
8. M.N. Tamin and H. Ghonem, “A Criterion for the Fracture of Bridging Fibers in Metal Matrix Composites,” Proc. Int. Conf. on Ceramic and Metal Matrix Composites, CMMC 96, San Sebastian, Spain, 9-12 Sept. 1996.
9. M.N. Tamin, D.J. Osborne and H. Ghonem, “A Fiber/Matrix Interface Cracking in Metal Matrix Composites at Elevated Temperature,” Proc. 5th Int. Symp. On Processing and Fabrication of Advanced Materials, TMS/ASM Fall Meeting, Cincinati, OH, Oct. 6-10, 1996.
10. D.J. Osborne, M.N. Tamin and H. Ghonem, “A Link Between Processing and Damage Response in Metal Matrix Composites,” Proc. Int. Mechanical Engineering Congress and Exposition: ASME Winter Annual Meeting, Symp. On Application on Metallic Materials in Advanced Engineering Systems and Emerging Technologies, Atlanta, GA, Nov. 17-22, 1996.
11. M.N. Tamin and H. Ghonem, “A Fiber Damage Mechanisms in Titanium Metal Matrix Composites,” Proc. Int. Conf. on Fatigue of Composites, Societe Francaise de Metallurgie et de Materiaux, Paris, France, Jun 3-5, 1997.
12. M.N. Tamin and H. Ghonem, “Interphase Debonding Strength of Ti-MMC Using Localized Damage Approach,” Proc. 5th Int. Conf. on Localized Damage, Bologna, Italy, June 8-10, 1998.
13. M.N. Tamin and H. Ghonem, “Fatigue Strength of SCS-6 Bridging Fibers in Titanium Metal Matrix Composites,” Proc. Sixth Int. Conf. On Processing and Fabrication of Advanced Materials, K.A. Khor, T.S. Srivatsan and J.J. Moore, eds., IOM Communications Ltd., UK, 1998, pp. 691-702.
14. M.N. Tamin and H. Ghonem, “Experimental-Numerical Model for Bridging Fiber Fracture in SiC/Ti Metal Matrix Composites,” Proc. Int. Conf. on Advances in Materials and Processing Technologies, Vol. I, A.M.S. Hamouda, S. Sulaiman and M. Ahmadun, eds., Sirim Press, Malaysia, 1998, pp. 645-652.
15. M.N. Tamin and H. Ghonem, “Fatigue Damage Mechanisms of Bridging Fibers in Titanium Metal Matrix Composites,” Proc. Intl. Mechanical Engineering Congress and Exposition, Symposium on Durability and Damage Tolerance of Composite Materials and Structures, ASME, Nashville, TN, Nov. 14-19, 1999.
16. M.S. Mustapha and M.N. Tamin, “Influence of R-Ratio on Fatigue Crack Growth Rate Behavior of Type 316 Stainless Steel,” Proc. World Engineering Congress, Aerospace Engineering, A.A. Yazid, M.A.W. Usmani, P.R. Arora and W. Asrar, Eds., Sirim Press Malaysia, 1999, pp. 35-38.
17. Mohd Nasir Tamin, “Fatigue Damage Mechanisms in Unidirectional SiC/Ti Metal Matrix Composites,” Proc. Research Seminar on Construction, Material and Environmental Technology, UTM, 1999, pp. 159-167.
18. S. Hamada, A. Nozue and M.N. Tamin, “Fatigue Crack Growth Mechanisms of Cast Ti-48Al (at. %) Alloy,” Proc. Int. Conf. on Damage and Fracture Mechanics 2000, C.A. Brebbia and A.P.S. Selvadurai, eds., Wessex Publication, UK, 2000, pp. 203-212.
19. M.N.Tamin, S. Hamada and A. Nozue,” Fatigue Crack Growth Behavior of Cast TiAl Alloy in Air and Vacuum Environment,” Proc. The Malaysian Science and Technology Congress 2000, MSTC2000, Symposium C, Nov. 2000, pp. C41.
2001-2005:
20. H. Suzuki, A. Nozue and M.N. Tamin, “In-situ Observation of Fatigue Crack Propagation in TiAl Intermetallics,” Proc. 2nd Int. Conf. On Light Materials for Transportation System, LIMAT2001, 6-10 May, 2001, Pusan, Korea, Vol. II, pp. 781-786.
21. M.N. Tamin, W.R.W. Mahmud and M. Mustaffa, “Fatigue Crack Growth Behavior of Welded Steel Plates,” Proc. The Malaysian Science and Technology Congress 2001, MSTC2001, Oct. 2001, pp. 91.
22. A. Amrin, E. Hamzah, M.N. Tamin, F.H. Stott and G.C. Wood, “Surface Morphology of Ti-Al Based Intermetallics Oxidised Between 700 oC to 1100 oC for 150 Hours,” Proc. 11th Scientific Conf. on Electron Microscopy, Dec. 2002, pp. 337-340.
23. Mohd Nasir TAMIN, “Role of Materials Testing in the Development of Engineering Technology,” Proc. Conf. on Engineering Education, CEE 2004, Dec. 2004.
24. L.Y. Ban, M.N. Tamin and T.J. Goh, “Evolution of Internal states in a Sn-Pb Solder Joint During Re-flow and Thermal Cycles,” Proc. 6th Int. Conf. Electronics Materials and Packaging, Dec. 2004, pp. 450-455.
25. A. Amrin, E. Hamzah, M.N. Tamin, F.H. Stott and G.C. Wood, “Oxidation Behaviour of Ti-Al Based Intermetallics at 900 oC: Isothermal and Cyclic Conditions,” Proc. XXI Regional Conf. and Workshop on Solid State and Technology, Kota Kinabalu, Sabah, 2004.
26. A. Amrin, E. Hamzah, M.N. Tamin, F.H. Stott and G.C. Wood, “Influence of Oxidizing Environment to the Scale Formation of Ti-Al Based Intermetallics,” Proc. 4th Int. Materials Technology Conf. & Exhibition, Kuala Lumpur, 2004.
27. M.N. Tamin and Y.B. Liew, “Numerical Modeling of Cyclic Stress-Strain Behavior of Sn-Pb Solder Joint During Thermal Fatigue,” Proc. National Seminar on Computational and Experimental Mechanics, May 17-18, 2005, pp. 351-359.
28. M.N. Tamin, Y.B. Liew, A.N.R. Wagiman and L. W. Keat, “Solder Joint Fatigue in a Surface-Mount Assembly Subjected to Mechanical Loading,” Proc. 7th Electronic Packaging Technology Conference, EPTC, Singapore, Dec. 7-9, 2005, pp. 439-443.
2006-2010:
29. H.S. Pang and M.N. Tamin, “Low CTE Composite Material to Improve Substrate Warp and Solder Joint Reliability in Electronic Packaging,” Proc. Conf. on Manufacturing and Electronic Technology, Johor Bahru, Jan. 14-15, 2006, pp. 135-140.
30. Y.B. Liew and M.N. Tamin, “A Mechanical Approach for Thermal Reliability Assessment of Surface Mount Assembly,” Proc. Conf. on Manufacturing and Electronic Technology, Johor Bahru, Jan. 14-15, 2006, pp. 127-134.
31. M.N. Tamin, Y.B. Liew, A.N.R. Wagiman and L. W. Keat, “Assessment of Solder Joint Fatigue Performance Using Cyclic Flexural Loading,” Proc. 31st Int. Conf. on Electronics Manufacturing and Technology, IEMT, Malaysia, Nov. 8-10, 2006, pp. 102-108.
32. M.N. Tamin and F.M. Nor, “Hybrid Experimental-Computational Approach for Solder/ Intermetallic Interface Shear Strength Determination in Tin-Lead Solder Joints,” presented at the Int. Conf. Advanced Computational Engineering and Experimenting, ACE-X, Algarve, Portugal, July 12-13, 2007.
33. M.N. Tamin, I. Sudin and T.T. Mon, “Thermal-Mechanical Responses of Ti-6Al-4V During Orthogonal Cutting Process,” presented at the Int. Conf. Diffusion in Solids and Liquids, DSL-2007, Algarve, Portugal, July 4-6, 2007.
34. M.N Tamin and H. Osman, “Stress Analysis and Fatigue Life Prediction of a Wobble Plate,” Proc. Regional Conf. on Advances in Computational and Experimental Mechanics, (CEM-EM3ARC), Bangi, Selangor, 27-28 Nov 2007.
35. A.H. Abdullah, M.R.A. Kadir and M.N. Tamin, “Effects of Stem Lengths on Stress and Strain Distribution of Cemented Hip Arthoplasty,” proc. Int. Conf. on Ergonomics (ICE 2007), Penang, Malaysia, 3-5 Dec 2007.
36. M.A. Khattak, M.S. Maslan and M.N. Tamin, “Effects of Absorbed Hydrogen on Crack-tip Ductility in Welded A516 Steel,” Proc. Nat. Metallurgical Conf. (NMC 2007), Johor Bahru, Johor, 26-27 Nov 2007.
37. M.N. Tamin, E. Hamzah and O.W. Rex, “Effects of Chromium Content on Fatigue Crack Growth Behavior of Ti-48Al-xCr Alloys,” Proc. 2nd Regional Conf. on Vehicle Engineering and Technology (RiVET2008), Kuala Lumpur, Malaysia, 15-17 July 2008.
38. Z.B. Lai, N. Kamsah, W.K. Loh and M.N. Tamin, “Mechanics of Sn-4Ag-0.5Cu Solder Joints in a Ball Grid Array Assembly during Reflow and Temperature Cycles,” proc. 33rd Int. Electronics Manufacturing Technology Conf. (IEMT2008), Penang, 4-6 Nov, 2008.
39. Z.B. Lai, N. Kamsah and M.N. Tamin, “Reliability Modeling of Microelectronics Assembly: Constitutive Model for Lead-free Solder Joints,” SCOReD Conference, Johor Bahru, 2008.
40. M.A. Khattak and M.N. Tamin,”Effect of Thermal Aging and Absorbed Hydrogen on Fatigue Crack Growth Behavior of Welded A516 Steel,” IGCES Conference, Johor Bahru, 2008.
41. F.M. Nor, W.K. Loh, N. Kamsah and M.N. Tamin, “Damage Mechanics Model for Interface Fracture Process in Solder Interconnects,” proc. 10th Electronics Packaging Technology Conf. (EPTC2008), Singapore, 9-12 Dec, 2008.
42. Z.B. Lai, W.K. Loh and M.N. Tamin, “Fatigue of Sn-4Ag-0.5Cu Solder Joints during Cyclic Bending of a BGA Assembly,” proc. 11th Int. Conf. on Electronics Materials and Packaging (EMAP2009), Penang, 1-3 Dec, 2009.
43. Z.B. Lai, W.K. Loh and M.N. Tamin, “Damage Mechanics of Solder/Pad Interface Fracture in Pb-free Solder Interconnects,” 10th Electronics Packaging Technology Conf. (EPTC2009), Singapore, 9-11 Dec, 2009.
44. H. Osman and M.N. Tamin, “Creep Response of Austenitic Stainless Steel Foils for Advanced Recuperators Applications,” 3rd South East Asia Technical University Consortium (SEATUC), UTM, 25-26 Feb 2009.
45. M.A. Khattak and M.N. Tamin, “Effects of Prior Thermal Exposure on fatigue Crack Growth Behavior of Welded A516 Steel,” Mini Symposium on Fracture and Strength of Solids, Penang,
4-5 June 2009.
46. H. Osman and M.N. Tamin, “Mechanism-based Model for Creep of Austenitic Stainless Steel Foils,” Mini Symposium on Fracture and Strength of Solids, Penang, 4-5 June 2009.
47. Y. Prawoto, R. Idris, N. Kamsah And M.N. Tamin, “Three-Dimensional Modeling To Compute Plastic Zone In Front Of Crack In Compact Tension Sample Of Multiphase Material,” Proc. 19th International Workshop On Computational Mechanics Of Materials (IWCMM 2009), Romania, 1-4 September 2009.
48. S.S.R. Koloor, A. Abdul-Latif and M.N. Tamin, “Delamination Failure Process in CFRP Composite Panels Under Flexural Loading,” 4th South East Asia Technical University Consortium (SEATUC), Tokyo, Japan, 25-26 Feb 2010.
49. N.M. Shaffiar, W.K. Loh, N. Kamsah and M.N. Tamin, “Progressive Damage in Sn-4Ag-0.5Cu Solder Joints during Flexural Fatigue of a BGA Package,” Proc. 34th Int. Electronics Manufacturing Technology Conference (IEMT 2010), Melaka, 30 Nov-2 Dec 2010.
50. N.M. Shaffiar, W.K. Loh, N. Kamsah and M.N. Tamin, “Continuum Damage Evolution in Pb-Free Solder Joint under Shear Fatigue Loadings,” Proc. 12th Electronics Packaging Technology Conference (EPTC 2010), Singapore, 8-10 Dec 2010.
2011-2013:
51. N.M. Shaffiar, W.K. Loh And M.N. Tamin, “Damage Progression In BGA Solder Joints During Board-Level Drop Test ,” 13th Electronics Packaging Technology Conference (EPTC 2011), Singapore, 7-9 Dec 2011.
52. K.J. Wong, X.J. Gong, S. Aivazzadeh And M.N. Tamin , “Numerical Simulation Of Mode I Delamination Behaviour Of Multidirectional Composite Laminates With Fibre Bridging Effect,” Proc. 15th European Conference On Composite Materials (ECCM15), Venice, 24-28 June 2012.
53. A.F.M. Yamin, N.M. Shaffiar, W.K. Loh, And M.N. Tamin, “Extended Cohesive Zone Model For Simulation Of Solder/IMC Interface Cyclic Damage Process In Pb-Free Solder Interconnects, “ 35th Int. Electronics Manufacturing Technology Conference (IEMT2012), Ipoh Malaysia, 6-8 Nov 2012.
54. N.M. Shaffiar , A.F.M. Yamin, And M.N. Tamin, “Fatigue Failure Processes In Pb-Free Solder Joints Using Continuum Damage And Cohesive Zone Models,” 14th Electronics Packaging Technology Conference, Singapore, 5-7 Dec 2012.
55. S.S.R. Koloor And M.N. Tamin, “Effects Of Lamina Damages On Flexural Stiffness Of CFRP Composites” 8th Asian-Australasian Conference On Composite Materials (ACCM-8), Kuala Lumpur Malaysia, 6 – 8 November 2012.
56. R. Alipour, S. Izman,and M.N. Tamin, “Estimation of charge mass for high speed forming of circular plates using energy method,” 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), Johor Bahru Malaysia, 4 – 6 December2013.
57. F.M. Nor, H.Y. Lee, J.Y. Lim, D. Kurniawan, and M.N. Tamin, “Effect of starter defect to GIIC of unidirectional CFRP composite,” International Conference on Mechanical Engineering (ICOME 2013), Mataram, Lombok Indonesia, 19 – 21 September 2013.
