1. Ab Wahid, M., Othman, N., Zain, M.Z.M., Shaharuddin, N.M.R., 2021. Control and Simulation of Obstacle Avoidance for a Quadcopter. JOURNAL OF AERONAUTICS ASTRONAUTICS AND AVIATION, 53 (2), pp 251-256

2. Ibrahim N.I., Al-Sulaiman F.A., Rehman S., Saat A., Ani F.N., 2021. Economic analysis of a novel solar-assisted air conditioning system with integral absorption energy storage. JOURNAL OF CLEANER PRODUCTION, 291, pp 125918-125918

3. Kim, N., Kim, Y., Jaafar, M.N.M., Rahim, M.R., Said, M., 2021. Effects of hydrogen addition on structure and NO formation of highly CO-Rich syngas counterflow nonpremixed flames under MILD combustion regime. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 46 (17), pp 10518-10534

4. Fan L., Tian B., Chong C.T., Mohd Jaafar M.N., Tanno K., McGrath D., de Oliveira P.M., Rogg B., Hochgreb S., 2021. The effect of fine droplets on laminar propagation speed of a strained acetone-methane flame: Experiment and simulations. Combustion and Flame, 229, pp 111377-111377

5. Zainal M.T., Mohd Yasin M.F., Abdul Wahid M., Mohd Sies M., 2021. A Flame Structure Approach for Controlling Carbon Nanotube Growth in Flame Synthesis. Combustion Science and Technology, 193 (8), pp 1326-1342

6. Faizal H.M., Nyakuma B.B., Rahman M.R.A., Rahman M.M., Kamaruzaman N.B., Syahrullail S., 2021. Comprehensive review on high hydrogen permselectivity of palladium based membranes: Part I. Johnson Matthey Technology Review, 65 (1), pp 64-76

7. Faizal H.M., Nyakuma B.B., Rahman M.R.A., Rahman M.M., Kamaruzaman N.B., Syahrullail S., 2021. Comprehensive review on high hydrogen permselectivity of palladium based membranes: Part II. Johnson Matthey Technology Review, 65 (1), pp 77-86

8. Amzin, S., Mohd Yasin, M.F., 2021. Modelling of a Bluff-Body Stabilised Premixed Flames Close to Blow-Off. COMPUTATION, 9 (4), pp 43-43

9. Adam K., Wahid M.A., 2021. On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled swirl flameless combustor (Sfc). Evergreen, 8 (1), pp 117-122

10. Mazlan M.A., Yasin M.F.M., Saat A., Wahid M.A., Ghazali A.D., Rahman M.N., 2021. Initiation characteristics of rotating supersonic combustion engine. Evergreen, 8 (1), pp 177-181

11. Rahman M.N., Wahid M.A., 2021. Renewable-based zero-carbon fuels for the use of power generation: A case study in Malaysia supported by updated developments worldwide. Energy Reports, 7, pp 1986-2020

12. Zaini N.Z., Kamaruzaman N.B., Abidin U., 2021. Magnetic microbeads trapping using microfluidic and permanent magnet system. Evergreen, 8 (1), pp 156-162

13. Rahman M.N., Wahid M.A., Yasin M.F.M., Abidin U., Mazlan M.A., 2021. Predictive numerical analysis on the mixing characteristics in a rotating detonation engine (Rde). Evergreen, 8 (1), pp 123-130

14. Shahrin, M.S.N., Othman, N., Mohd, N.A.R.N., Abd Wahid, M., 2021. Numerical analysis of hydrogen peroxide monopropellant thruster. INTERNATIONAL JOURNAL OF SUSTAINABLE AVIATION , 7 (3), pp 249-263

15. Rahman, M.R.A., Shuib, W.M.A.W., Saad, M.R., Idris, A.C., Faizal, H.M., 2021. Combustion Characteristic inside Micro Channel Combustor. JURNAL KEJURUTERAAN, 4 (1), pp 109-116

16. Gheidan A.A.S., Wahid M.A., Munir F.A., Opia A.C., 2021. Feasibility Study Of Bio-Fuel As A Sustainable Product Of Biomass: An Overview Of Its Fundamentals, Application And Environmental Impact. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2), pp 106-122

17. Hasan, M.F., Mohd Fuad, M.A.H., Jauro, A., Nasirudeen, M., Akinyemi, S.A., Oladokun, O., Nyakuma, B.B., 2021. PHYSICOCHEMICAL, MINERALOGY, AND THERMO-KINETIC CHARACTERISATION OF NEWLY DISCOVERED NIGERIAN COALS UNDER PYROLYSIS AND COMBUSTION CONDITIONS. INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY, 8 (4), pp 697-716

18. Mohd Jaafar, M.N., Rahim, M.R., Said, M., Mohd Ismail, M.S., Malik, M.S.A., Mavalavan, N., 2021. PRESTASI PEMBAKARAN BIODIESEL BERASASKAN MINYAK BUNGA MATAHARI KE ATAS PEMBAKAR BERBAHAN API CECAIR. JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, 82 (2), pp 127-145

19. Mohd Yasin, M.F., Supee, A., Hamzah, N., Lei, L., Amzin, S., Muhammad Yazid, M.N.A.W., Zainal, M.T., Sies, M.M., 2021. THE INFLUENCES OF OXYGEN CONCENTRATION AND EXTERNAL HEATING ON CARBON NANOTUBE GROWTH IN DIFFUSION FLAME. CFD LETTERS, 13 (12), pp 45-62

20. Shahrin M.S.N., Othman N., ,Mohd N.A.R.N., Wahid M.A., Zain M.Z.M., 2021. Porosity Effect of the Silver Catalyst in Hydrogen Peroxide Monopropellant Thruster. CFD Letters, 13 (12)

1. Kasani, A., Wahid, M.A., Ghazali, A.D. and Abdulrahman, M.B., 2020. The Effects of Multiple Swirl Generator Inlets Circumferential Distribution to a Liquid Fuelled Ultra-High Swirl Flameless Combustion Characteristics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76(2), pp.65-74.

2. Sies, M.M. and Wahid, M.A., Numerical Investigation of the Asymmetrical Vortex Combustor Running on Biogas. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74(1), pp. 1-18

3. Hosseini, S.E. and Wahid, M.A., 2020. Hydrogen from solar energy, a clean energy carrier from a sustainable source of energy. International Journal of Energy Research, 44(6), pp.4110-4131.

4. Elhawary, S., Saat, A., Wahid, M.A. and Ghazali, A.D., 2020. Experimental study of using biogas in Pulse Detonation Engine with hydrogen enrichment. International Journal of Hydrogen Energy.

5. Barzegaravval, H., Hosseini, S.E., Wahid, M.A. and Saat, A.B., 2020. Dimensionless Exergo-economic and Emission Parameters for Biogas Fueled Gas Turbine Optimization. Journal of Cleaner Production, p.121153.

6. Elhawary, S., Saat, A., Mazlan, M.A. and Wahid, M.A., 2020, July. Ignition Characteristics of Supersonic Combustion. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012107). IOP Publishing.

7. Rahman, M.N., Wahid, M.A. and Yasin, M.M., 2020, July. Predictive Numerical Analysis on the Fuel Homogeneity in a Rotating Detonation Engine (RDE) Implementing Radially-Entered Fuel Injection Scheme. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012109). IOP Publishing

8. Hosseini, S.E., Butler, B. and Wahid, M.A., 2020. Hydrogen as a battery for a rooftop household solar power generation unit. International Journal of Hydrogen Energy, 45(48), pp.25811-25826.

9. Faizal, H.M., Nyakuma, B.B., Rahman, M.R.A., Rahman, M., Kamaruzaman, N.B. and Syahrullail, S., 2020. Comprehensive Review on High Hydrogen Perm-selectivity of Palladium Based Membranes. Johnson Matthey Technology Review.

10. Japar, W.M.A.A., Sidik, N.A.C., Saidur, R., Kamaruzaman, N., Asako, Y. and Yusof, S.N.A., 2020. The Effect of Triangular Cavity Shape on the Hybrid Microchannel Heat Sink Performance. CFD Letters, 12(9), pp.1-14.

11. Japar, W.M.A.A., Sidik, N.A.C., Kamaruzaman, N., Asako, Y. and Muhammad, N.M.A., 2020. Hydrothermal performance in the Hydrodynamic Entrance Region of Rectangular Microchannel Heat Sink. Journal of Advanced Research in Numerical Heat Transfer, 1(1), pp.22-31.

12. Ab Wahid, M., Asmi, A.N., Othman, N., Ardani, M.I., Zain, M.M. and Mansor, S., 2020, July. The effect of different motor constants to an commercial propeller. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012096). IOP Publishing.

13. Ardani, M.I., Wahid, M.A., Talib, M.A., Daud, Z.C., Asus, Z. and Ariff, M.A.M., 2020. Thermal component for an electrochemical lithium-Ion battery model: Impact and variation on the battery performance. Materials Today: Proceedings.

14. Hamzah et al., “Effect of fuel and oxygen concentration toward catalyst encapsulation in water-assiste d flame synthesis of carbon nanotub es,” vol. 220, pp. 272–287, 2020, doi: 10.1016/j.combustflame.2020.07.007.

15. Thalhah et al., “Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi ‑ empirical approach,” Carbon Lett., no. Cvd, 2020, doi: 10.1007/s42823-020-00127-z.

1. Md Salleh M.F., Mohammed H.A., Wahid M.A., 2019. Thermal and hydraulic characteristics of trapezoidal winglet across fin-and-tube heat exchanger (FTHE). Applied Thermal Engineering, 149, pp 1379-1393

2. Mohamad, SM; Othman, N; Sharif, I; Zain, MZM; Abu Bakar, AR., 2019. Dynamic Behaviour and Characteristics of Rubber Blade Car Performance. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 16 (1), pp 6437-6452

3. Md Salleh M.F., Gholami A., Wahid M.A., 2019. Numerical evaluation of thermal hydraulic performance in fin-and-tube heat exchangers with various vortex generator geometries arranged in common-flow-down or common-flow-up. Journal of Heat Transfer, 141 (2), pp 21801-21801

4. Nadaraja D., Kamaruzaman N., Abidin U., Sies M.M., 2019. Experimental study on the effect of multilayer microchannel arrangement to the thermal hydraulic performance of microchannel arrays. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1), pp 23-31

5. Mohd Fuad M.A.H., Hasan M.F., Ani F.N., 2019. Microwave torrefaction for viable fuel production: A review on theory, affecting factors, potential and challenges. Fuel, 253, pp 512-526

6. Hamzah N., Yasin M.F.M., Yusop M.Z.M., Zainal M.T., Rosli M.A.F., 2019. Identification of cnt growth region and optimum time for catalyst oxidation: Experimental and modelling studies of flame synthesis. Evergreen, 6 (1), pp 85-91

7. Junoh, MM; Saat, A; Ani, FN , 2019. Synthesis of carbon nanoparticles from tyre pyrolysis oil using CO2 laser and their characterization. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 59 (1) pp 81-90

8. Gholami A., Mohammed H.A., Wahid M.A., Khiadani M., 2019. Parametric design exploration of fin-and-oval tube compact heat exchangers performance with a new type of corrugated fin patterns. International Journal of Thermal Sciences, 144, pp 173-190

9. Chiong M.C., Chong C.T., Ng J.-H., Tran M.-V., Lam S.S., Valera-Medina A., Mohd Jaafar M.N., 2019. Combustion and emission performances of coconut, palm and soybean methyl esters under reacting spray flame conditions. Journal of the Energy Institute, 92 (4), pp 1034-1044

10. Ismail E., Fauzi F.B., Mohamed M.A., Mohd Yasin M.F., Mohd Abid M.A.A., Yaacob I.I., Md Din M.F., Ani M.H., 2019. Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36), pp 21000-21008

11. Heng E.W., Zainal M.T., Yasin M.F.M., Hamzah N. , 2019. Effects of flame structure and flame strain on the growth region of carbon nanotubes in counter-flow diffusion flame. CFD Letters, 11 (6), pp 72-85

12. Hamzah N., Mohd Yasin M.F., Mohd Yusop M.Z., Saat A., Mohd Subha N.A., 2019. Growth region characterization of carbon nanotubes synthesis in heterogeneous flame environment with wire-based macro-image analysis. Diamond and Related Materials, 99, pp 107500-107500

13. Rahman, MRA; Baharom, SNA; Faizal, HM., 2019. Investigation on the Mass Burning Rate of Biodiesel Blended with Ethanol Subjected to Cross Airflow. INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 37 (2), pp 428-432

14. Fuad M.A.H.M., Faizal H.M., Ani F.N., 2019. Experimental investigation on water washing and decomposition behaviour for empty fruit bunch. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2), pp 207-219

15. Othman M.H., Rahim M.R., Jaafar M.N.M., Said M., Othman N., Malik M.S.A., Azli A.A.M., 2019. Study of combustion performance of syngas from biomass waste (wood waste) in a gas burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2), pp 247-257

16. Adnan A.Y., Rahim M.R., Jaafar M.N.M., Othman N., Ismail M.S.M., Arifin K., Hasan M.F., 2019. Combustion performance of syngas from palm kernel shell in a gas burner. JURNAL TEKNOLOGI, 81 (6), pp 187-193

17. Samiran N.A., Jaafar M.N.M., Chong C.T., Rahim M.R., Said M., Ariffin M.K., 2019. Investigation on the properties of syngas produced from torrefied biomass using downdraft gasifier. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2, pp 264-274

1. Barzegaravval, H; Hosseini, SE; Wahid, MA; Saat, A., 2018. Effects of fuel composition on the economic performance of biogas-based power generation systems. APPLIED THERMAL ENGINEERING, 128, pp 1543-1554

2. Mohd Faizal H., Shamsuddin H.S., M. Heiree M.H., Muhammad Ariff Hanaffi M.F., Abdul Rahman M.R., Rahman M.M., Latiff Z.A., 2018. Torrefaction of densified mesocarp fibre and palm kernel shell. Renewable Energy, 122, pp 419-428

3. Hosseini S.E., Barzegaravval H., Chehroudi B., Wahid M.A., 2018. Hybrid solar flameless combustion system: Modeling and thermodynamic analysis. Energy Conversion and Management, 166, pp 146-155

4. Rahman M.R.A., Saad M.R., Idris A.C., Faizal H.M., 2018. Heat transfer of the TiO2/water nanofluid in an annulus of the finite rotating cylinders. International Journal of Heat and Technology, 36 (1), pp 353-358

5. Ho G.S., Faizal H.M., Ani F.N., 2018. Microwave induced pyrolysis of oil palm biomass by using layer microwave absorber in reverse flow double cylinder reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1), pp 129-138

6. Shahriman A.S., Wahid M.A., Saad S.M., Zain M.Z.Md., Hussein M., Ahmad Z., Yaacob M.S., Abdullah M.Y., Mohamad M., 2018. Improving design of piezoelectric braille cell for braille display devices. Journal of Telecommunication, Electronic and Computer Engineering, 10 (14-1), pp 107-111

7. Mohd Jaafar M.N., Safiullah, 2018. Combustion characteristics of rice bran oil biodiesel in an oil burner. Jurnal Teknologi, 80 (3), pp 185-192

8. Ghazanfari, SA; Wahid, MA., 2018. HEAT TRANSFER ENHANCEMENT AND PRESSURE DROP FOR FIN-AND-TUBE COMPACT HEAT EXCHANGERS WITH DELTA WINGLET-TYPE VORTEX GENERATORS. FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 16 (2), pp 233-247

9. Mokhtar, MOM; Ja’afar, MNM; Yusoff, M; Said, M; Rahim, MR; Malik, MSA., 2018. COMBUSTION PERFORMANCE OF SYNGAS FROM BIOMASS WASTE IN GAS BURNER SYSTEM. JURNAL TEKNOLOGI, 80 (5), pp 189-195

10. Ardani, M. I.; Patel, Y.; Siddiq, A.; et al., 2018. COMBINED EXPERIMENTAL AND NUMERICAL EVALUATION OF THE DIFFERENCES BETWEEN CONVECTIVE AND CONDUCTIVE THERMAL CONTROL ON THE PERFORMANCE OF A LITHIUM ION CELL. ENERGY, 144 (2018), pp 81-97

11. Fan, LM; McGrath, D; Chong, CT; Jaafar, MNM; Zhong, HT; Hochgreb, S., 2018. Laser-induced incandescence particle image velocimetry (LII-PIV) for two-phase flow velocity measurement. EXPERIMENTS IN FLUIDS, 59 (10), pp 156-156

12. Ja’afar M.N.M., Azli A.A.M., Azman M.A.F.M., Said M., 2018. Combustion performance of firing biodiesel from waste cooking oil in an oil burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1), pp 45-55

1. Rahim, MR; Jaafar, MNM. 2017. KESAN PEMBAKARAN PADA KEADAAN NISBAH KESETARAAN phi=0.8333 MENGGUNAKAN DWI PEMUSAR ALIRAN JEJARIAN. JURNAL TEKNOLOGI, 79 (2), pp 147-154

2. Wahid M.A., Hosseini S.E., Hussen H.M., Akeiber H.J., Saud S.N., Mohammad A.T., 2017. An overview of phase change materials for construction architecture thermal management in hot and dry climate region. Applied Thermal Engineering, 112, pp 1240-1259.

3. Ganjehkaviri A., Mohd Jaafar M.N., Hosseini S.E., Barzegaravval H., 2017. Genetic algorithm for optimization of energy systems: Solution uniqueness, accuracy, Pareto convergence and dimension reduction. Energy, 119, pp S125-S127

4. Hosseini S.E., Barzegaravval H., Ganjehkaviri A., Wahid M.A., Mohd Jaafar M.N., 2017. Modelling and exergoeconomic-environmental analysis of combined cycle power generation system using flameless burner for steam generation. Energy Conversion and Management, 135, pp 362-372

5. Mazalan, NA; Malek, AA; Wahid, MA; Mailah, M., 2017. Sensitivity Analysis on Neural Network Algorithm for Primary Superheater Spray Modeling. HEAT TRANSFER ENGINEERING, 38 (4), pp 417-422

6. Gholami A., Wahid M.A., Mohammed H.A., 2017. Thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns. International Journal of Heat and Mass Transfer, 106, pp 573-592

7. Jaafar M.N.M., Rahim M.R., Salleh M.N.M., 2017. Kajian prestasi penggunaan bahan api envo-diesel dalam sistem pembakaran. Jurnal Teknologi, 79 (3), pp 39-44

8. Rahim M.R., Mohd Jaafar M.N., 2017. Kesan sudut pusaran terhadap pembentukan emisi menggunakan dwi pemusar udara aliran jejarian. Jurnal Teknologi, 79 (2), pp 137-146

9. Salleh M.F.M., Wahid M.A., Saat A., Kamaruzaman N., Sies M.M., Abidin U., 2017. Flow visualization of flat and curved trapezoidal winglet vortex generator in fin-and-tube channel in inline arrangement. International Review of Mechanical Engineering, 11 (2), pp 101-107

10. Rahim M.R., Yusof M., Azman A.H., Jaafar M.N.M., 2017. Prestasi pembakaran minyak jatropha sebagai bahan api cecair biodiesel pada sistem pembakar berbahan api cecair. Jurnal Teknologi, 79 (6), pp 177-183

11. Akeiber H.J., Hosseini S.E., Hussen H.M., Wahid M.A., Mohammad A.T., 2017. Thermal performance and economic evaluation of a newly developed phase change material for effective building encapsulation. Energy Conversion and Management, 150, pp 48-61

12. Salleh M.F.M., Wahid M.A., Ghazanfari S.A., 2017. The effect of vortex generator base length on thermal hydraulic performance across fin-and-tube heat exchanger. Jurnal Teknologi, 79 (42919), pp 53-59

13. Keat K.C., Mohd Yasin M.F., Wahid M.A., Saat A., Md Yudin A.S., 2017. Computational study on combustion and emission characteristic of piloted flames by varying composition CO2 of simulated biogas. Jurnal Teknologi, 79 (42919), pp 89-95

14. Zainul M.N.M., Jaafar M.N.M., Lazim T.M., 2017. Effect of varying the double radial swirler configuration on the fluid dynamic and emissions performances in a can combustor. Jurnal Teknologi, 79 (42919), pp 33-41

15. Ganjehkaviri A., Yusof M., Mohd Jaafar M.N., 2017. Effects of duct burner on bottoming cycle in a combined cycle power plant. Jurnal Teknologi, 79 (42919), pp 27-32

16. Suhaimi M.S., Saat A., Wahid M.A., 2017. Flammability and burning rates of low quality biogas at atmospheric condition. Jurnal Teknologi, 79 (42919), pp 15-20

17. Hamzah, N; Yasin, MFM; Yusop, MZM; Saat, A; Subha, NAM., 2017. Rapid production of carbon nanotubes: a review on advancement in growth control and morphology manipulations of flame synthesis. JOURNAL OF MATERIALS CHEMISTRY A, 5 (48), pp 25144-25170

18. Adnan, MA; Fuad, MAHM; Hasan, MF., 2017. OXIDATIVE TORREFACTION FOR PULVERIZED PALM BIOMASS USING AIR. JURNAL TEKNOLOGI, 79 (7-4), pp 7-14