Publications

2023
  1. Effect of Recirculation Ratio on the Combustion Characteristics of an Asymmetric Swirling Flameless Combustor using Biogas, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 108 (1 …
  2. International Committee: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010002,
  3. Photos: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010003
  4. Preface: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010001
  5. Rotating detonation engine experiment with asymmetric vortex combustion chamber shape, AIP Conference Proceedings 2749 (1)
  6. Influence of equivalence ratio on emissions in meso-scale vortex combustor, AIP Conference Proceedings 2749 (1)
  7. Vortex generator towards sustainable fin-and-tube heat exchanging process, AIP Conference Proceedings 2749 (1)
  8. Early assessment of thermal analysis rotating detonation engine, AIP Conference Proceedings 2749 (1)
  9. Indirect evaporative cooling system improvement: A brief review, AIP Conference Proceedings 2749 (1)
  10. Advance thermal configuration using computational fluid dynamic in co-firing coal and biomass, AIP Conference Proceedings 2749 (1)
  11. Natural convection over a vertical flat plate: A numerical and experimental investigation, AIP Conference Proceedings 2749 (1)
  12. Wave propagation characteristics in predetonator of rotating detonation engine, AIP Conference Proceedings 2749 (1)
  13. Flameless combustion mode as a promising trend: A review on its fundamental, role towards emissions reduction, fuel consumption and performance enhancement, AIP Conference Proceedings 2749 (1)
  14. Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment, Carbon Letters, 1-12
  15. Effect of nitrous oxide on laminar burning velocity, hydrodynamic, and diffusive–thermal instability of biogas combustion, Journal of Thermal Analysis and Calorimetry 148 (8), 3073-3088
  16. A single-step chemistry mechanism for biogas supersonic combustion velocity with nitrogen dilution, Journal of Thermal Analysis and Calorimetry 148 (8), 3019-3033
  17. A Review on the Combustion Characteristics of an Asymmetric Swirling Combustor in Flameless Mode Transdisciplinary Research and Education Center for Green Technologies …
  18. Configuration effects of liquid fuel flameless combustion characteristics in a forward flow laboratory-scale furnace, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44 …
  19. Analysis of Fuel Concentration Effect Toward Carbon Nanotubes Growth in Methane Diffusion Flame Using CFD Simulations, Asia Simulation Conference, 313-325
  20. Modelling of the Flame Synthesis of Single-walled Carbon Nanotubes in Non-premixed Flames with Aerosol Catalyst, Journal of Advanced Research in Numerical Heat Transfer 13 (1), 39-51
  21. Numerical investigation on the effect of methane diffusion flame parameters toward the carbon nanotubes growth inside quasi-pyrolysis chamber, Materials Today: Proceedings
  22. Novel design of micropump based on multi-angle paper-based capillary approach for enhanced and well-controlled flow rates, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …
  23. Wave propagation characteristics in predetonator of rotating detonation engine, AIP Conference Proceedings 2749 (1)
  24. Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment, Carbon Letters, 1-12
  25. Control of morphology and crystallinity of CNTs in flame synthesis with one-dimensional reaction zone, Beilstein Journal of Nanotechnology 14 (1), 741-750
  26. A single-step chemistry mechanism for biogas supersonic combustion velocity with nitrogen dilution, Journal of Thermal Analysis and Calorimetry 148 (8), 3019-3033
  27. Morphology and Growth Region Analysis of Carbon Nanotubes Growth in Water-Assisted Flame Synthesis, Combustion Science and Technology 195 (4), 860-877
  28. The Control on Morphology and Crystallinity of CNT in Flame Synthesis with One-Dimensional Reaction Zone, Beilstein Archives 2023 (1), 5
  29. Preface: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010001
  30. International Committee: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010002
  31. Photos: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010003
  32. Wave propagation characteristics in predetonator of rotating detonation engine, AIP Conference Proceedings 2749 (1)
  33. Effect of nitrous oxide on laminar burning velocity, hydrodynamic, and diffusive–thermal instability of biogas combustion, Journal of Thermal Analysis and Calorimetry 148 (8), 3073-3088
  34. Preface: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010001
  35. International Committee: Recent Advancements in Thermofluid Engineering,
  36. RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010002
  37. Photos: Recent Advancements in Thermofluid Engineering, RECENT ADVANCEMENTS IN THERMOFLUID ENGINEERING 2749 (1), 010003
  38. Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment, Carbon Letters, 1-12
  39.  
  40. UAV CONTROLLER PERFORMANCE UNDER WIND DISTURBANCE, Journal of Transport System Engineering
  41. Impact of Cowl Deflections on Scramjet Intake Aerodynamics with Shock-on-Lip Condition, Journal of Aeronautics, Astronautics and Aviation 55 (3S), 461-468
  42. OTEC PERFORMANCE EVALUATION USING DIFFERENT WORKING FLUIDS AND VARIATIONS IN OPERATING ORC CONDITIONS, Jurnal Mekanikal, 14-26
  43. THERMODYNAMICS ANALYSIS OF SOLAR-EJECTOR PUMP OTEC (SEP-OTEC) RANKINE CYCLE USING AMMONIA AS REFRIGERANT, Jurnal Mekanikal, 1-13
  44. Feasibility Study of Biofuel Incorporated Nanoparticles as Sustainable IC Engine Fuel: Opportunities and Challenges-An overview, Automotive Experiences 6 (1), 94-121
  45. Production of Biokerosene Hydrocarbons using Coconut Oil with CoO-NiO/Kaolin Catalyst via Solvent-free and Inert Atmosphere Catalytic Deoxygenation, Malaysian Journal of Catalysis 7 (1), 1-5
  46. Review on Flow Controls for Vehicles Aerodynamic Drag Reduction, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 101 (1 …
  47. Production of Biokerosene Hydrocarbons using Coconut Oil with CoO-NiO/Kaolin Catalyst via Solvent-free and Inert Atmosphere Catalytic Deoxygenation
2022

1. Rahim, M.R., Trisasongko, A.P., Jaafar, M.N.M., Othman, N., Ramli, Y., Malik, M.S.A., Said, M., 2022. REVIEW: DEVELOPMENT OF GASIFICATION TECHNOLOGY AND ITS APPLICATION. JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 84 (1), pp 193-210

2. Buglie, W.L. N., Tamrin, K.F., Sheikh, N.A., Yasin, M.F.M., Mohamaddan, S., 2022. Enhanced Fluid Mixing Using a Reversed Multistage Tesla Micromixer. CHEMICAL ENGINEERING & TECHNOLOGY, 45 (7), pp 1255-1263

2021

1. Ab Wahid, M., Othman, N., Zain, M.Z.M., Shaharuddin, N.M.R., 2021. Control and Simulation of Obstacle Avoidance for a Quadcopter. JOURNAL OF AERONAUTICS ASTRONAUTICS AND AVIATION, 53 (2), pp 251-256

2. Ibrahim N.I., Al-Sulaiman F.A., Rehman S., Saat A., Ani F.N., 2021. Economic analysis of a novel solar-assisted air conditioning system with integral absorption energy storage. JOURNAL OF CLEANER PRODUCTION, 291, pp 125918-125918

3. Kim, N., Kim, Y., Jaafar, M.N.M., Rahim, M.R., Said, M., 2021. Effects of hydrogen addition on structure and NO formation of highly CO-Rich syngas counterflow nonpremixed flames under MILD combustion regime. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 46 (17), pp 10518-10534

4. Fan L., Tian B., Chong C.T., Mohd Jaafar M.N., Tanno K., McGrath D., de Oliveira P.M., Rogg B., Hochgreb S., 2021. The effect of fine droplets on laminar propagation speed of a strained acetone-methane flame: Experiment and simulations. Combustion and Flame, 229, pp 111377-111377

5. Zainal M.T., Mohd Yasin M.F., Abdul Wahid M., Mohd Sies M., 2021. A Flame Structure Approach for Controlling Carbon Nanotube Growth in Flame Synthesis. Combustion Science and Technology, 193 (8), pp 1326-1342

6. Faizal H.M., Nyakuma B.B., Rahman M.R.A., Rahman M.M., Kamaruzaman N.B., Syahrullail S., 2021. Comprehensive review on high hydrogen permselectivity of palladium based membranes: Part I. Johnson Matthey Technology Review, 65 (1), pp 64-76

7. Faizal H.M., Nyakuma B.B., Rahman M.R.A., Rahman M.M., Kamaruzaman N.B., Syahrullail S., 2021. Comprehensive review on high hydrogen permselectivity of palladium based membranes: Part II. Johnson Matthey Technology Review, 65 (1), pp 77-86

8. Amzin, S., Mohd Yasin, M.F., 2021. Modelling of a Bluff-Body Stabilised Premixed Flames Close to Blow-Off. COMPUTATION, 9 (4), pp 43-43

9. Adam K., Wahid M.A., 2021. On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled swirl flameless combustor (Sfc). Evergreen, 8 (1), pp 117-122

10. Mazlan M.A., Yasin M.F.M., Saat A., Wahid M.A., Ghazali A.D., Rahman M.N., 2021. Initiation characteristics of rotating supersonic combustion engine. Evergreen, 8 (1), pp 177-181

11. Rahman M.N., Wahid M.A., 2021. Renewable-based zero-carbon fuels for the use of power generation: A case study in Malaysia supported by updated developments worldwide. Energy Reports, 7, pp 1986-2020

12. Zaini N.Z., Kamaruzaman N.B., Abidin U., 2021. Magnetic microbeads trapping using microfluidic and permanent magnet system. Evergreen, 8 (1), pp 156-162

13. Rahman M.N., Wahid M.A., Yasin M.F.M., Abidin U., Mazlan M.A., 2021. Predictive numerical analysis on the mixing characteristics in a rotating detonation engine (Rde). Evergreen, 8 (1), pp 123-130

14. Shahrin, M.S.N., Othman, N., Mohd, N.A.R.N., Abd Wahid, M., 2021. Numerical analysis of hydrogen peroxide monopropellant thruster. INTERNATIONAL JOURNAL OF SUSTAINABLE AVIATION , 7 (3), pp 249-263

15. Rahman, M.R.A., Shuib, W.M.A.W., Saad, M.R., Idris, A.C., Faizal, H.M., 2021. Combustion Characteristic inside Micro Channel Combustor. JURNAL KEJURUTERAAN, 4 (1), pp 109-116

16. Gheidan A.A.S., Wahid M.A., Munir F.A., Opia A.C., 2021. Feasibility Study Of Bio-Fuel As A Sustainable Product Of Biomass: An Overview Of Its Fundamentals, Application And Environmental Impact. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2), pp 106-122

17. Hasan, M.F., Mohd Fuad, M.A.H., Jauro, A., Nasirudeen, M., Akinyemi, S.A., Oladokun, O., Nyakuma, B.B., 2021. PHYSICOCHEMICAL, MINERALOGY, AND THERMO-KINETIC CHARACTERISATION OF NEWLY DISCOVERED NIGERIAN COALS UNDER PYROLYSIS AND COMBUSTION CONDITIONS. INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY, 8 (4), pp 697-716

18. Mohd Jaafar, M.N., Rahim, M.R., Said, M., Mohd Ismail, M.S., Malik, M.S.A., Mavalavan, N., 2021. PRESTASI PEMBAKARAN BIODIESEL BERASASKAN MINYAK BUNGA MATAHARI KE ATAS PEMBAKAR BERBAHAN API CECAIR. JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, 82 (2), pp 127-145

19. Mohd Yasin, M.F., Supee, A., Hamzah, N., Lei, L., Amzin, S., Muhammad Yazid, M.N.A.W., Zainal, M.T., Sies, M.M., 2021. THE INFLUENCES OF OXYGEN CONCENTRATION AND EXTERNAL HEATING ON CARBON NANOTUBE GROWTH IN DIFFUSION FLAME. CFD LETTERS, 13 (12), pp 45-62

20. Shahrin M.S.N., Othman N., ,Mohd N.A.R.N., Wahid M.A., Zain M.Z.M., 2021. Porosity Effect of the Silver Catalyst in Hydrogen Peroxide Monopropellant Thruster. CFD Letters, 13 (12)

2020

1. Kasani, A., Wahid, M.A., Ghazali, A.D. and Abdulrahman, M.B., 2020. The Effects of Multiple Swirl Generator Inlets Circumferential Distribution to a Liquid Fuelled Ultra-High Swirl Flameless Combustion Characteristics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76(2), pp.65-74.

2. Sies, M.M. and Wahid, M.A., Numerical Investigation of the Asymmetrical Vortex Combustor Running on Biogas. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74(1), pp. 1-18

3. Hosseini, S.E. and Wahid, M.A., 2020. Hydrogen from solar energy, a clean energy carrier from a sustainable source of energy. International Journal of Energy Research, 44(6), pp.4110-4131.

4. Elhawary, S., Saat, A., Wahid, M.A. and Ghazali, A.D., 2020. Experimental study of using biogas in Pulse Detonation Engine with hydrogen enrichment. International Journal of Hydrogen Energy.

5. Barzegaravval, H., Hosseini, S.E., Wahid, M.A. and Saat, A.B., 2020. Dimensionless Exergo-economic and Emission Parameters for Biogas Fueled Gas Turbine Optimization. Journal of Cleaner Production, p.121153.

6. Elhawary, S., Saat, A., Mazlan, M.A. and Wahid, M.A., 2020, July. Ignition Characteristics of Supersonic Combustion. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012107). IOP Publishing.

7. Rahman, M.N., Wahid, M.A. and Yasin, M.M., 2020, July. Predictive Numerical Analysis on the Fuel Homogeneity in a Rotating Detonation Engine (RDE) Implementing Radially-Entered Fuel Injection Scheme. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012109). IOP Publishing

8. Hosseini, S.E., Butler, B. and Wahid, M.A., 2020. Hydrogen as a battery for a rooftop household solar power generation unit. International Journal of Hydrogen Energy, 45(48), pp.25811-25826.

9. Faizal, H.M., Nyakuma, B.B., Rahman, M.R.A., Rahman, M., Kamaruzaman, N.B. and Syahrullail, S., 2020. Comprehensive Review on High Hydrogen Perm-selectivity of Palladium Based Membranes. Johnson Matthey Technology Review.

10. Japar, W.M.A.A., Sidik, N.A.C., Saidur, R., Kamaruzaman, N., Asako, Y. and Yusof, S.N.A., 2020. The Effect of Triangular Cavity Shape on the Hybrid Microchannel Heat Sink Performance. CFD Letters, 12(9), pp.1-14.

11. Japar, W.M.A.A., Sidik, N.A.C., Kamaruzaman, N., Asako, Y. and Muhammad, N.M.A., 2020. Hydrothermal performance in the Hydrodynamic Entrance Region of Rectangular Microchannel Heat Sink. Journal of Advanced Research in Numerical Heat Transfer, 1(1), pp.22-31.

12. Ab Wahid, M., Asmi, A.N., Othman, N., Ardani, M.I., Zain, M.M. and Mansor, S., 2020, July. The effect of different motor constants to an commercial propeller. In IOP Conference Series: Materials Science and Engineering (Vol. 884, No. 1, p. 012096). IOP Publishing.

13. Ardani, M.I., Wahid, M.A., Talib, M.A., Daud, Z.C., Asus, Z. and Ariff, M.A.M., 2020. Thermal component for an electrochemical lithium-Ion battery model: Impact and variation on the battery performance. Materials Today: Proceedings.

14. Hamzah et al., “Effect of fuel and oxygen concentration toward catalyst encapsulation in water-assiste d flame synthesis of carbon nanotub es,” vol. 220, pp. 272–287, 2020, doi: 10.1016/j.combustflame.2020.07.007.

15. Thalhah et al., “Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi ‑ empirical approach,” Carbon Lett., no. Cvd, 2020, doi: 10.1007/s42823-020-00127-z.

2019

1. Md Salleh M.F., Mohammed H.A., Wahid M.A., 2019. Thermal and hydraulic characteristics of trapezoidal winglet across fin-and-tube heat exchanger (FTHE). Applied Thermal Engineering, 149, pp 1379-1393

2. Mohamad, SM; Othman, N; Sharif, I; Zain, MZM; Abu Bakar, AR., 2019. Dynamic Behaviour and Characteristics of Rubber Blade Car Performance. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 16 (1), pp 6437-6452

3. Md Salleh M.F., Gholami A., Wahid M.A., 2019. Numerical evaluation of thermal hydraulic performance in fin-and-tube heat exchangers with various vortex generator geometries arranged in common-flow-down or common-flow-up. Journal of Heat Transfer, 141 (2), pp 21801-21801

4. Nadaraja D., Kamaruzaman N., Abidin U., Sies M.M., 2019. Experimental study on the effect of multilayer microchannel arrangement to the thermal hydraulic performance of microchannel arrays. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1), pp 23-31

5. Mohd Fuad M.A.H., Hasan M.F., Ani F.N., 2019. Microwave torrefaction for viable fuel production: A review on theory, affecting factors, potential and challenges. Fuel, 253, pp 512-526

6. Hamzah N., Yasin M.F.M., Yusop M.Z.M., Zainal M.T., Rosli M.A.F., 2019. Identification of cnt growth region and optimum time for catalyst oxidation: Experimental and modelling studies of flame synthesis. Evergreen, 6 (1), pp 85-91

7. Junoh, MM; Saat, A; Ani, FN , 2019. Synthesis of carbon nanoparticles from tyre pyrolysis oil using CO2 laser and their characterization. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 59 (1) pp 81-90

8. Gholami A., Mohammed H.A., Wahid M.A., Khiadani M., 2019. Parametric design exploration of fin-and-oval tube compact heat exchangers performance with a new type of corrugated fin patterns. International Journal of Thermal Sciences, 144, pp 173-190

9. Chiong M.C., Chong C.T., Ng J.-H., Tran M.-V., Lam S.S., Valera-Medina A., Mohd Jaafar M.N., 2019. Combustion and emission performances of coconut, palm and soybean methyl esters under reacting spray flame conditions. Journal of the Energy Institute, 92 (4), pp 1034-1044

10. Ismail E., Fauzi F.B., Mohamed M.A., Mohd Yasin M.F., Mohd Abid M.A.A., Yaacob I.I., Md Din M.F., Ani M.H., 2019. Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36), pp 21000-21008

11. Heng E.W., Zainal M.T., Yasin M.F.M., Hamzah N. , 2019. Effects of flame structure and flame strain on the growth region of carbon nanotubes in counter-flow diffusion flame. CFD Letters, 11 (6), pp 72-85

12. Hamzah N., Mohd Yasin M.F., Mohd Yusop M.Z., Saat A., Mohd Subha N.A., 2019. Growth region characterization of carbon nanotubes synthesis in heterogeneous flame environment with wire-based macro-image analysis. Diamond and Related Materials, 99, pp 107500-107500

13. Rahman, MRA; Baharom, SNA; Faizal, HM., 2019. Investigation on the Mass Burning Rate of Biodiesel Blended with Ethanol Subjected to Cross Airflow. INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 37 (2), pp 428-432

14. Fuad M.A.H.M., Faizal H.M., Ani F.N., 2019. Experimental investigation on water washing and decomposition behaviour for empty fruit bunch. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2), pp 207-219

15. Othman M.H., Rahim M.R., Jaafar M.N.M., Said M., Othman N., Malik M.S.A., Azli A.A.M., 2019. Study of combustion performance of syngas from biomass waste (wood waste) in a gas burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2), pp 247-257

16. Adnan A.Y., Rahim M.R., Jaafar M.N.M., Othman N., Ismail M.S.M., Arifin K., Hasan M.F., 2019. Combustion performance of syngas from palm kernel shell in a gas burner. JURNAL TEKNOLOGI, 81 (6), pp 187-193

17. Samiran N.A., Jaafar M.N.M., Chong C.T., Rahim M.R., Said M., Ariffin M.K., 2019. Investigation on the properties of syngas produced from torrefied biomass using downdraft gasifier. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2, pp 264-274

2018

1. Barzegaravval, H; Hosseini, SE; Wahid, MA; Saat, A., 2018. Effects of fuel composition on the economic performance of biogas-based power generation systems. APPLIED THERMAL ENGINEERING, 128, pp 1543-1554

2. Mohd Faizal H., Shamsuddin H.S., M. Heiree M.H., Muhammad Ariff Hanaffi M.F., Abdul Rahman M.R., Rahman M.M., Latiff Z.A., 2018. Torrefaction of densified mesocarp fibre and palm kernel shell. Renewable Energy, 122, pp 419-428

3. Hosseini S.E., Barzegaravval H., Chehroudi B., Wahid M.A., 2018. Hybrid solar flameless combustion system: Modeling and thermodynamic analysis. Energy Conversion and Management, 166, pp 146-155

4. Rahman M.R.A., Saad M.R., Idris A.C., Faizal H.M., 2018. Heat transfer of the TiO2/water nanofluid in an annulus of the finite rotating cylinders. International Journal of Heat and Technology, 36 (1), pp 353-358

5. Ho G.S., Faizal H.M., Ani F.N., 2018. Microwave induced pyrolysis of oil palm biomass by using layer microwave absorber in reverse flow double cylinder reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1), pp 129-138

6. Shahriman A.S., Wahid M.A., Saad S.M., Zain M.Z.Md., Hussein M., Ahmad Z., Yaacob M.S., Abdullah M.Y., Mohamad M., 2018. Improving design of piezoelectric braille cell for braille display devices. Journal of Telecommunication, Electronic and Computer Engineering, 10 (14-1), pp 107-111

7. Mohd Jaafar M.N., Safiullah, 2018. Combustion characteristics of rice bran oil biodiesel in an oil burner. Jurnal Teknologi, 80 (3), pp 185-192

8. Ghazanfari, SA; Wahid, MA., 2018. HEAT TRANSFER ENHANCEMENT AND PRESSURE DROP FOR FIN-AND-TUBE COMPACT HEAT EXCHANGERS WITH DELTA WINGLET-TYPE VORTEX GENERATORS. FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 16 (2), pp 233-247

9. Mokhtar, MOM; Ja’afar, MNM; Yusoff, M; Said, M; Rahim, MR; Malik, MSA., 2018. COMBUSTION PERFORMANCE OF SYNGAS FROM BIOMASS WASTE IN GAS BURNER SYSTEM. JURNAL TEKNOLOGI, 80 (5), pp 189-195

10. Ardani, M. I.; Patel, Y.; Siddiq, A.; et al., 2018. COMBINED EXPERIMENTAL AND NUMERICAL EVALUATION OF THE DIFFERENCES BETWEEN CONVECTIVE AND CONDUCTIVE THERMAL CONTROL ON THE PERFORMANCE OF A LITHIUM ION CELL. ENERGY, 144 (2018), pp 81-97

11. Fan, LM; McGrath, D; Chong, CT; Jaafar, MNM; Zhong, HT; Hochgreb, S., 2018. Laser-induced incandescence particle image velocimetry (LII-PIV) for two-phase flow velocity measurement. EXPERIMENTS IN FLUIDS, 59 (10), pp 156-156

12. Ja’afar M.N.M., Azli A.A.M., Azman M.A.F.M., Said M., 2018. Combustion performance of firing biodiesel from waste cooking oil in an oil burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1), pp 45-55

2017

1. Rahim, MR; Jaafar, MNM. 2017. KESAN PEMBAKARAN PADA KEADAAN NISBAH KESETARAAN phi=0.8333 MENGGUNAKAN DWI PEMUSAR ALIRAN JEJARIAN. JURNAL TEKNOLOGI, 79 (2), pp 147-154

2. Wahid M.A., Hosseini S.E., Hussen H.M., Akeiber H.J., Saud S.N., Mohammad A.T., 2017. An overview of phase change materials for construction architecture thermal management in hot and dry climate region. Applied Thermal Engineering, 112, pp 1240-1259.

3. Ganjehkaviri A., Mohd Jaafar M.N., Hosseini S.E., Barzegaravval H., 2017. Genetic algorithm for optimization of energy systems: Solution uniqueness, accuracy, Pareto convergence and dimension reduction. Energy, 119, pp S125-S127

4. Hosseini S.E., Barzegaravval H., Ganjehkaviri A., Wahid M.A., Mohd Jaafar M.N., 2017. Modelling and exergoeconomic-environmental analysis of combined cycle power generation system using flameless burner for steam generation. Energy Conversion and Management, 135, pp 362-372

5. Mazalan, NA; Malek, AA; Wahid, MA; Mailah, M., 2017. Sensitivity Analysis on Neural Network Algorithm for Primary Superheater Spray Modeling. HEAT TRANSFER ENGINEERING, 38 (4), pp 417-422

6. Gholami A., Wahid M.A., Mohammed H.A., 2017. Thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns. International Journal of Heat and Mass Transfer, 106, pp 573-592

7. Jaafar M.N.M., Rahim M.R., Salleh M.N.M., 2017. Kajian prestasi penggunaan bahan api envo-diesel dalam sistem pembakaran. Jurnal Teknologi, 79 (3), pp 39-44

8. Rahim M.R., Mohd Jaafar M.N., 2017. Kesan sudut pusaran terhadap pembentukan emisi menggunakan dwi pemusar udara aliran jejarian. Jurnal Teknologi, 79 (2), pp 137-146

9. Salleh M.F.M., Wahid M.A., Saat A., Kamaruzaman N., Sies M.M., Abidin U., 2017. Flow visualization of flat and curved trapezoidal winglet vortex generator in fin-and-tube channel in inline arrangement. International Review of Mechanical Engineering, 11 (2), pp 101-107

10. Rahim M.R., Yusof M., Azman A.H., Jaafar M.N.M., 2017. Prestasi pembakaran minyak jatropha sebagai bahan api cecair biodiesel pada sistem pembakar berbahan api cecair. Jurnal Teknologi, 79 (6), pp 177-183

11. Akeiber H.J., Hosseini S.E., Hussen H.M., Wahid M.A., Mohammad A.T., 2017. Thermal performance and economic evaluation of a newly developed phase change material for effective building encapsulation. Energy Conversion and Management, 150, pp 48-61

12. Salleh M.F.M., Wahid M.A., Ghazanfari S.A., 2017. The effect of vortex generator base length on thermal hydraulic performance across fin-and-tube heat exchanger. Jurnal Teknologi, 79 (42919), pp 53-59

13. Keat K.C., Mohd Yasin M.F., Wahid M.A., Saat A., Md Yudin A.S., 2017. Computational study on combustion and emission characteristic of piloted flames by varying composition CO2 of simulated biogas. Jurnal Teknologi, 79 (42919), pp 89-95

14. Zainul M.N.M., Jaafar M.N.M., Lazim T.M., 2017. Effect of varying the double radial swirler configuration on the fluid dynamic and emissions performances in a can combustor. Jurnal Teknologi, 79 (42919), pp 33-41

15. Ganjehkaviri A., Yusof M., Mohd Jaafar M.N., 2017. Effects of duct burner on bottoming cycle in a combined cycle power plant. Jurnal Teknologi, 79 (42919), pp 27-32

16. Suhaimi M.S., Saat A., Wahid M.A., 2017. Flammability and burning rates of low quality biogas at atmospheric condition. Jurnal Teknologi, 79 (42919), pp 15-20

17. Hamzah, N; Yasin, MFM; Yusop, MZM; Saat, A; Subha, NAM., 2017. Rapid production of carbon nanotubes: a review on advancement in growth control and morphology manipulations of flame synthesis. JOURNAL OF MATERIALS CHEMISTRY A, 5 (48), pp 25144-25170

18. Adnan, MA; Fuad, MAHM; Hasan, MF., 2017. OXIDATIVE TORREFACTION FOR PULVERIZED PALM BIOMASS USING AIR. JURNAL TEKNOLOGI, 79 (7-4), pp 7-14

2016
  1. Thermodynamic assessment of integrated biogas-based micro-power generation system, Energy conversion and management 128, 104-119
  2. Investigation of the coupled effects of temperature and partial pressure on catalytic growth of carbon nanotubes using a modified growth rate model ,Materials Research Express 3 (10), 105040
  3. A review on phase change material (PCM) for sustainable passive cooling in building envelopes, Renewable and Sustainable Energy Reviews 60, 1470-1497
  4. Optimizing flame synthesis of carbon nanotubes: experimental and modelling perspectives, Jurnal Teknologi 78 (8-4), 133
  5. Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections, J. Teknol 78 (8-4), 113-118
  6. Design and characterization of rectangular stud antenna, Sindh University Research Journal-SURJ (Science Series) 47 (1)
  7. A newly composed paraffin encapsulated prototype roof structure for efficient thermal management in hot climate, Energy 104, 99-106
  8. Flame propagation and burning rates of methane-air mixtures using schlieren photography, Jurnal Teknologi (Sciences & Engineering) 78 (10-2), 21-27,
  9. Investigation on heat transfer enhancement in a corrugated fin-and-tube compact heat exchanger, Jurnal Teknologi (Sciences and Engineering) 78, 10-2
  10. INFLUENCE OF MODIFIED AIR ON COMBUSTION CHARACTERISTICS IN MESO-SCALE VORTEX COMBUSTOR, J. Teknol 78 (10-2)
  11. Hydrogen production from renewable and sustainable energy resources: Promising green energy carrier for clean development, Renewable and Sustainable Energy Reviews 57, 850-866
  12. Renewable energy policy in Germany and Malaysia: Success factors, Proceedings of the 2016 International Conference on Industrial Engineering …
  13. Multicriteria-based decision aiding technique for assessing energy policy elements-demonstration to a case in Bangladesh, Applied energy 164, 237-244
  14. Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts, International Communications in Heat and Mass Transfer 71, 234-244
  15. Phase change materials-assisted heat flux reduction: Experiment and numerical analysis, Energies 9 (1), 30
  16. Advances in Heat Transfer, Flow Engineering and Energy Installations, Trans Tech Publications Ltd
  17. Progress in Energy and Thermal Sciences, Trans Tech Publications Ltd
  18. Progress in Energy and Thermal Sciences, Progress in Energy and Thermal Sciences, 1-322
  19. Effects of air entry of swirling flameless combustion in a low nox burner, Int. Rev. Mech. Eng
  20. Marketing Mix Effect on The Decision of Customers in The Matter In Choosing The Home Purchase Loans In Pt, BNI 46 Griya Bni (Persero) Tbk Branch Makassar, Internasional Journal of Business and Management Invention 5 (6), 20-30
  21. Power generation sources in Malaysia: Status and prospects for sustainable development, Journal of Advanced Review on Scientific Research 25 (1), 11-28
  22. Sustainable power generation pathways in Malaysia: Development of long-range scenarios, Journal of Advanced Research in Applied Mechanics 24 (1), 22-38
  23. Prediction of Convective Heat Transfer Coefficient and Temperature Distribution of Air-Conditioned Spaces Using Numerical Simulation, Modern Applied Science 10 (8), 1-12
  24. Investigation of the coupled effects of temperature and partial pressure on catalytic growth of carbon nanotubes using a modified growth rate model, Materials Research Express 3 (10), 105040
  25. Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections, Jurnal Teknologi 78 (8-4), 113-118
  26. Optimizing flame synthesis of carbon nanotubes: experimental and modelling perspectives, Jurnal Teknologi 78 (8-4), 133
  27. Validation of a benchmark methanol flame using Open FOAM, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 28, 7-16
  28. Characterization of a Short Microchannel Device for Surface Cooling, JURNAL TEKNOLOGI 78 (8-4), 25-30
  29. Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections, J. Teknol 78 (8-4), 113-118
  30. Investigation on heat transfer enhancement in a corrugated fin-and-tube compact heat exchanger, Jurnal Teknologi (Sciences and Engineering) 78, 10-2
  31. Flame propagation and burning rates of methane-air mixtures using schlieren photography, Jurnal Teknologi (Sciences & Engineering) 78 (10-2), 21-27
  32. INFLUENCE OF MODIFIED AIR ON COMBUSTION CHARACTERISTICS IN MESO-SCALE VORTEX COMBUSTOR, J. Teknol 78 (10-2)
  33. Pressure Rise Generation by the Combustion of Methane-Air in a Closed Vessel, ARPN Journal of Engineering and Applied Sciences 11 (8), 5146-5149
  34. Renewable energy policy in Germany and Malaysia: Success factors, Proceedings of the 2016 International Conference on Industrial Engineering …
  35. Characterization of a Short Microchannel Device for Surface Cooling, JURNAL TEKNOLOGI 78 (8-4), 25-30
  36. Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections, J. Teknol 78 (8-4), 113-118
  37. Investigation on heat transfer enhancement in a corrugated fin-and-tube compact heat exchanger, Jurnal Teknologi (Sciences and Engineering) 78, 10-2
  38. INFLUENCE OF MODIFIED AIR ON COMBUSTION CHARACTERISTICS IN MESO-SCALE VORTEX COMBUSTOR, J. Teknol 78 (10-2)
  39. Development of multiobjective trajectory-optimization method and its application to improve aircraft landing, Aerospace Science and Technology 58, 166-177
  40. Time-series optimization methodology and knowledge discovery of descend trajectory for civil aircraft, 2016 IEEE Congress on Evolutionary Computation (CEC), 893-900
  41. Development of Digital Flight Motion Methodology Based on Aerodynamic Derivatives Approximation, Journal of Robotics and Mechatronics 28 (2), 215-225
  42. Trajectory optimization of civil aircraft for hazardous condition using aerodynamics and flight dynamics simulation, 首都大学東京
  43. Trajectory and aerodynamic control optimization of civil aircraft descent under hazard situations based on high-fidelity aerodynamic database, 34th AIAA Applied Aerodynamics Conference, 4041